NCR S10XL manual Removing SIMMs

Configuring the System Board

Installing SIMMs

Note: Always install SIMMs starting with Bank 0 and in pairs. For example, for a total memory of 8 MB, install two 4 MB SIMMs in sockets 0 and 1 of Bank 0. You can not use an 8 MB SIMM alone for an 8 MB memory.

Figure 2-3

SIMM Sockets

SIMM Sockets

Bank 0

Bank 1

To remove SIMMs, follow these steps:

Removing SIMMs

1.Press the holding clips on both sides of the SIMM outward to release it.

2.Press the SIMM downward at about a 45o angle.

2-10 NCR S10XL Hot Plug Server User Guide