Configure Computer Selection Parameters

Using the System Utilities

The parameters are described in Table 5-3. The /B, /H, /M, and /K parameters are explained in Table 5-2.

Table 5-3

Configure Computer Selection

Parameter	Function	Description
/N	Non-target modeling	This parameter runs the utility in non-target
	mode	modeling mode. When you run this utility, the
		configuration which is stored in the SYSTEM.SCI
		file displays.
		When you save the configuration, it is normally
		saved to the SYSTEM.SCI file. However, with
		non-target modeling mode, you can create an SCI
		file for a computer other than the one on which
		you are running the utility, create multiple SCI
		files, and create one SCI file for multiple
		computers.

/T	Detailed view by slot	This parameter causes the default view to be
		detailed by slot instead of overview.

/F	Fast configuration	This is the automatic configuration mode. The
	operation	utility determines the boards and options and
		configures the system without user assistance.

5-21