NCR S10XL manual Sample Standard Configuration

Sample Configurations

Sample Standard Configuration

4.Select Basic System Configuration. To go from page to page, press [Page Down] or [Page Up].

5.Go to page 2 and set parameters as follows (in the order indicated):

Hard Disk Block Mode	[Disabled]
Advanced PIO Mode	[Disabled]
Hard Disk Size > 504	[Disabled]
Hard Disk 32-Bit Access	[Disabled]
Auto Configuration	[Disabled]
Fast Boot Mode	[Disabled]
Num Lock After Boot	[Enabled]
Memory Test	[Enabled]

6.Return to page 1, and set parameters as follows:

Diskette Drive A	[1.44 MB 3.5-inch]
Diskette Drive B	[None]
Fixed Disk 0 ( 0 MB)	[None]
Fixed Disk 1 ( 0 MB)	[None]

7.Press [Esc] to return to the main menu in BIOS Setup.

8.Select Advanced System Configuration.

Page 1 - Verify that the parameters are set as follows:

C0000h - C7FFFh (Video BIOS)	[Enabled]
C8000h - CFFFFh	[Disabled]
D0000h - D7FFFh	[Disabled]
D8000h - DFFFFh	[Disabled]
Internal Cache (CPU Cache)	[Enabled]

C-4 NCR S10XL Hot Plug Server User Guide