Haier WDNS115BW Electrical Conections, Cold green / Hot red Water Indicator Lights, English

English

Cold (green) / Hot (red) Water Indicator Lights

When the green and red lights are illuminated on the front of the unit, the heating and cooling process is in progress. When the cold and hot water has reached their proper temperatures, both lights will turn off automatcially. Normally, hot water reaches proper temperature first.

WDNS115BW

HOT

POWER

HOT

COLD

WDNS32BW

COOL

ELECTRICAL CONECTIONS

Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord containing a grounding wire and a grounded plug. The plug must be inserted into an outlet that is prop- erly installed and grounded.

•Improper use of the plug may result in the risk of electric shock.

•Consult a qualified electrician or service technician if the grounding

instructions are not completely understood or if in doubt as to whether the appliance has been properly grounded.

Wiring Requirements

This appliance must be plugged into a 15Amp, 115 Volt, 60Hz

GROUNDED OUTLET.

Note: Where a standard two-prong outlet is encountered, it is the personal responsibility and obligation of the consumer to have it replaced with a properly grounded three-prong outlet.

Extension Cords

We do not recommend the use of an extension cord with this unit.

Power Interruptions

Occasionally, there may be power interruptions due to thunderstorms or other causes. Remove the power cord from wall outlet when a power out- age occurs. When power has been restored, re-plug the power cord into wall outlet.

10