Glass Breakage MAY Occur | hussman CR3HTO-HTB guide

IGFC-CR3H-HTB-1104

L O C AT I O N

The merchandisers have been designed for use only in air conditioned stores where temperature and humidity are maintained at or below 75°F and 55% relative humidity. DO NOT allow air conditioning, electric fans, open doors or windows (etc.) to create air currents around the merchandiser, as this will impair its correct operation.

Product temperature should always be maintained at a constant and proper temperature. This means that from the time the product is received, through storage, preparation and display, the temperature of the product must be controlled to maximize life of the product.

UN-CRATING THE STAND

Place the fixture as close to its permanent position as possible. Remove the top of the crate. Detach the walls from each other and remove from the skid. Unbolt the case from the skid. The fixture can now be lifted off the crate skid. Lift only at base of stand!

EXTERIOR LOADING

These models have not been structurally designed to support excessive external loading. Do not walk on their tops; This could cause serious personal injury and damage to the fixture.

GLASS BREAKAGE

MAY OCCUR!

Retighten glass along clamshell after leveling and first time case is brought to full operating temperature!

GLASS ADJUSTMENT

During shipment, the lubricant inside the cylinders may have settled. This settling may cause excessive or uneven tension on the glass - to the point of breakage. To avoid any damage, please follow these three easy steps:

1.Slowly raise and lower each glass section 6 times to a height of 6 inches.

2.Increase the height to 12 inches, and raise and lower the glass 6 more times.

3.Finally raise the glass to its full extension, and lower. These steps should release any settled lubricant within the cylinders and prevent any stress on the front glass.

LEVELING

IMPORTANT! It is imperative that cases and supporting counters be leveled from front to back and side to side prior to joining. A level case is necessary to insure proper operation, water drainage, and plexiglass alignment.

NOTE: A.To avoid removing concrete flooring, begin lineup leveling from the highest point of the store floor.

B. When wedges are involved in a lineup, set them first.

Installation

All cases were tested at a level state before shipping. When joining, use a carpenters level and shim enclosing or supporting cabinet accordingly.

1.Make sure the cabinet you are installing the FC4H CINNABON on is level.

2.Wire unit according to local codes.

Electrical

WIRING COLOR CODE

L1	BLACK
L2	ORANGE
L3	BLUE
NEUTRAL	WHITE

NOTE: High Leg Connection

Orange Only

CASE MUST BE GROUNDED

NOTE: Refer to label affixed to case to determine the actual configuration as checked in the “TYPE INSTALLED” boxes.

ELECTRICAL CIRCUIT IDENTIFICATION

Standard lighting for all models will be full length fluorescent lamps located within the case at the top.

The switch controlling the lights, the plug provided for digital scale, and the thermometer are located at the rear of the case mullion.

The receptacle that is provided on the exterior back of these models is intended for computerized scales with a five amp maximum load, not for large motors or other high wattage appliances. It should be wired to a dedi- cated circuit.

ELECTRICAL SERVICE RECEPTACLES (When Applicable)

The receptacles located on the exterior of the merchan- diser are intended for scales and lighted displays. They

CR3HTO-HTB specifications

The Hussman CR3HTO-HTB is a state-of-the-art refrigeration display case designed primarily for convenience stores, supermarkets, and other retail establishments that require an efficient and attractive solution for showcasing perishable products. The model exemplifies Hussman's commitment to innovation, sustainability, and energy efficiency while maintaining optimal product visibility.

One of the standout features of the CR3HTO-HTB is its sleek design, which incorporates a low-profile structure and expansive glass panels. This design not only enhances the aesthetic appeal of any retail space but also maximizes product visibility, allowing customers to easily browse through displayed items. The curved glass front provides an unobstructed view, making it easier for shoppers to see products from various angles.

In terms of technology, the CR3HTO-HTB boasts advanced climate control systems that ensure consistent temperature regulation. The unit utilizes a high-efficiency refrigeration system that can maintain optimal storage temperatures for a wide range of perishable goods, including dairy products, beverages, and prepared meals. Additionally, it features a digital thermostat for precise temperature management and monitoring, providing retailers with peace of mind that their products are stored safely.

Energy efficiency is a significant consideration with the CR3HTO-HTB. Equipped with LED lighting, the unit illuminates the display case without generating excessive heat, which helps maintain a stable internal environment and reduces energy consumption. Moreover, the refrigeration unit is designed with eco-friendly refrigerants, minimizing its impact on the environment. The incorporation of energy-efficient components not only complies with global sustainability standards but also helps operators reduce operational costs.

Another key characteristic of the Hussman CR3HTO-HTB is its adaptability. The case can be configured in multiple ways to fit different layouts and store formats, catering to diverse retail needs. Its modular design allows for easy integration with other display units, making it an ideal choice for retailers looking to create an optimized shopping experience.

In summary, the Hussman CR3HTO-HTB is a modern refrigeration display case that combines aesthetic design, superior technology, and energy efficiency. Its features, such as advanced climate control, exceptional visibility, and flexibility, make it a top choice for retailers aiming to enhance product presentation while committing to sustainability.