John Lewis JLBIDW 1200 instruction manual Something not working, Flashing fault code appears

Page 24

Something not working

If the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Force Centre.

Important! If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

...a flashing fault code appears

The dishwasher will not start or stops during operation and a sequence of intermittent audible signals are heard.

The point-shaped optical signal on the floor beneath the dishwasher’s door is flashing (not visible if the appliance has been installed higher up with a furniture door mounted flush).

Open the dishwasher’s door.

The intervention of an alarm is indicated by:

-the continuous flashing of the indicator light of the running programme,

-a fault code (as described in the chart) is visible in the digital display. Carry out the following suggested corrective actions.

 

Fault code / malfunction

Possible cause

Solutions

-

in the digital display

The water tap is blocked or furred with

Clean the water tap.

limescale.

 

 

appears

The water tap is turned off.

Turn the water tap on.

 

 

The machine does not fill with water.

The filter (where present) in the threaded

Clean the filter in the threaded hose fitting.

 

 

 

 

hose fitting at the water inlet valve is

 

 

 

blocked.

 

 

 

The water inlet hose has not been correctly

Check the water inlet hose connection.

 

 

laid or it is bent or squashed.

 

-

in the digital display

The sink spigot is blocked.

Clean out the sink spigot.

 

appears

The water drain hose has not been

Check the water drain hose connection.

 

 

The dishwasher will not drain.

correctly laid or it is bent or squashed.

 

-

in the digital display

Anti-flood device has activated.

Close the water tap and contact our extended warranty

 

appears

 

administrators on 0870 0107887 who will give you details

 

 

 

for your local Service Force Repair Agent.

Once the checks have been carried out, to continue the programme, press the button of the programme that was running before the intervention of the alarm and close the door.The programme will continue from the point at which it was interrupted.

If the fault code reappears or if another fault code not described above appears contact our extended warranty administrators on 0870 0107887 who will give you details for your local Service Force Repair Agent.

...there are problems when operating the dishwasher

Malfunction

Possible cause

Solutions

 

 

 

 

The dishwasher door has not been properly closed.

Close the door.

The programme does not start

 

 

The main plug is not plugged in.

Insert the mains plug.

 

 

 

 

 

The fuse has blown in the household fuse box.

Replace the fuse.

 

 

 

 

For dishwasher models with delay start option:

If dishes are to be washed immediately, cancel

 

Delay start has been selected.

the delay start.

 

 

 

There is a whistling noise during

The whistling is not a cause for concern.

Use a different brand of detergent.

washing

 

 

 

 

 

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 152953 25/0 Installation Child safetyMaintenance and cleaning Service UseEnvironmental information Ecological hintsFor polyoxymethylene, e.g. plastic clips Contents Description of the appliance Upper basket stop Water hardness dial Salt containerControl panel Rating plateInstallation Technical specificationsElectrical connection Green andYellow Earth Blue- Neutral Brown- LivePermanent connection Water supply connectionsWater outlet hose connection Remove all packaging before positioning the machineBuilding-in LevellingFixing to the adjacent units We therefore advise you to remove itControl panel Dishwasher must be switched off Multi-tab functionActivation/deactivation of the rinse aid dispenser Audible signals Deactivation/activation of the audible signalsFactory setting audible signals activated Setting manually Before using your dishwasher for the first timeWater softener Replace the lower basketSetting electronically Filling with dishwasher saltTo fill ExampleAdjusting the dose Rinse aidFilling with rinse aid Open the container byUsing the dishwasher Loading cutlery and dishesStart the wash programme Are not suitableLower basket Cutlery basketAdjusting the height of the upper basket Upper basketTo move to the higher position proceed as follows Pull out the basket until it stopsUse of detergent Fill with detergentClose the lid and press until it locks in place Different kinds of detergent Detergent tabletsConcentrated detergent Use of 3 in 1 combi detergentsWashing programmes AnyPartial load to be DayTo cancel a delay start in progress Turn on the water tap Press the On/Off buttonEnd of the washing programme Unloading the dishwasher Maintenance and cleaning Cleaning the filtersFrost precautions Moving the machineFlashing fault code appears There are problems when operating the dishwasherSomething not working Repairs After Sales Service Dishes are not cleanWash results are not satisfactory Spare partsPage Page John Lewis Partnership Victoria Street London SW1E 5NN

JLBIDW 1200 specifications

The John Lewis JLBIDW 1200 is a high-performance integrated dishwasher that combines cutting-edge technology with user-friendly features, making it an ideal addition to modern kitchens. This appliance stands out due to its sleek design and efficient functionality, catering to the demands of busy households.

One of the main features of the JLBIDW 1200 is its impressive energy efficiency. With an A++ energy rating, it minimizes electricity consumption while delivering powerful cleaning performance. This not only helps reduce utility bills but also makes it an environmentally friendly choice for the eco-conscious consumer.

The dishwasher boasts a generous capacity, accommodating up to 12 place settings. This space-efficient design allows you to handle extensive washing loads, making it perfect for family dinners or gatherings. The interior of the JLBIDW 1200 is thoughtfully designed with adjustable shelves and racks, allowing for optimal placement of various dishware, from tall pots to delicate glassware.

The JLBIDW 1200 incorporates advanced washing technologies that enhance its cleaning capabilities. With multiple wash programs, including intensive, normal, and eco modes, it offers flexibility to cater to different cleaning needs. The quick wash option is particularly useful for those in a rush, providing a fast and efficient clean in just 30 minutes.

One of the standout characteristics of this model is its quiet operation. With a noise level of just 47 dB, it runs quietly in the background, ensuring that your kitchen remains peaceful even during operation. This is especially beneficial in open-plan living spaces.

The dishwasher also features a user-friendly control panel with an intuitive display, allowing you to select cycles easily and monitor progress. The delay timer function enables users to set the washer to run at a convenient time, further enhancing its practicality.

Safety is a priority with the JLBIDW 1200. It is equipped with a child lock feature, preventing accidental interruptions during operation. Additionally, the appliance includes a flood protection system, which adds a layer of safety against any potential water leaks.

In summary, the John Lewis JLBIDW 1200 is a reliable, efficient, and feature-rich integrated dishwasher that meets the needs of today's households. Its combination of advanced cleaning technology, spacious design, and energy efficiency make it a top contender for anyone looking to upgrade their kitchen appliances.
Top Page Image Contents