John Lewis JLBIDW 1200 instruction manual Permanent connection, Water supply connections

Page 7

WARNING:

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

The plug must still be accessible after the appliance has been installed.

The appliance should not be connected to the electrical supply by means of an extension cable.

In case that the electrical cable has to be replaced, please contact our extended warranty administrators on 0870 0107887 who will give you details for your local Service Force Repair Agent.

Important!

If the mains supply cable is damaged it must be replaced; contact our warranty administrators on 0870 010 7887 who will give you details for your local Service Force Repair Agent.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Water supply connections

We recommend that this dishwasher is connected to your cold water supply.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto either a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications" shown on page 6.Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Important! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

DO NOT use connection hoses which have previously been used for an old appliance.

This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system.This appliance complies with the applicable plumbing regulations.

Water outlet hose connection

The end of the drain hose can be connected in the following ways:

1.To the sink outlet spigot, securing it to the underside of the work surface.This will prevent waste water from the sink running into the machine.

2.Hooked over the edge of the sink using the special curved plastic guide (if provided with the machine).

3.To a stand pipe provided with vent-hole, minimum internal diameter 4 cm.

The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 152953 25/0 Use InstallationChild safety Maintenance and cleaning ServiceEcological hints Environmental informationFor polyoxymethylene, e.g. plastic clips Contents Rating plate Description of the applianceUpper basket stop Water hardness dial Salt container Control panelGreen andYellow Earth Blue- Neutral Brown- Live InstallationTechnical specifications Electrical connectionRemove all packaging before positioning the machine Permanent connectionWater supply connections Water outlet hose connectionWe therefore advise you to remove it Building-inLevelling Fixing to the adjacent unitsControl panel Multi-tab function Dishwasher must be switched offActivation/deactivation of the rinse aid dispenser Deactivation/activation of the audible signals Audible signalsFactory setting audible signals activated Replace the lower basket Setting manuallyBefore using your dishwasher for the first time Water softenerExample Setting electronicallyFilling with dishwasher salt To fillOpen the container by Adjusting the doseRinse aid Filling with rinse aidAre not suitable Using the dishwasherLoading cutlery and dishes Start the wash programmeCutlery basket Lower basketPull out the basket until it stops Adjusting the height of the upper basketUpper basket To move to the higher position proceed as followsFill with detergent Use of detergentClose the lid and press until it locks in place Use of 3 in 1 combi detergents Different kinds of detergentDetergent tablets Concentrated detergentDay Washing programmesAny Partial load to beTurn on the water tap Press the On/Off button To cancel a delay start in progressEnd of the washing programme Unloading the dishwasher Moving the machine Maintenance and cleaningCleaning the filters Frost precautionsThere are problems when operating the dishwasher Flashing fault code appearsSomething not working Spare parts Repairs After Sales ServiceDishes are not clean Wash results are not satisfactoryPage Page John Lewis Partnership Victoria Street London SW1E 5NN

JLBIDW 1200 specifications

The John Lewis JLBIDW 1200 is a high-performance integrated dishwasher that combines cutting-edge technology with user-friendly features, making it an ideal addition to modern kitchens. This appliance stands out due to its sleek design and efficient functionality, catering to the demands of busy households.

One of the main features of the JLBIDW 1200 is its impressive energy efficiency. With an A++ energy rating, it minimizes electricity consumption while delivering powerful cleaning performance. This not only helps reduce utility bills but also makes it an environmentally friendly choice for the eco-conscious consumer.

The dishwasher boasts a generous capacity, accommodating up to 12 place settings. This space-efficient design allows you to handle extensive washing loads, making it perfect for family dinners or gatherings. The interior of the JLBIDW 1200 is thoughtfully designed with adjustable shelves and racks, allowing for optimal placement of various dishware, from tall pots to delicate glassware.

The JLBIDW 1200 incorporates advanced washing technologies that enhance its cleaning capabilities. With multiple wash programs, including intensive, normal, and eco modes, it offers flexibility to cater to different cleaning needs. The quick wash option is particularly useful for those in a rush, providing a fast and efficient clean in just 30 minutes.

One of the standout characteristics of this model is its quiet operation. With a noise level of just 47 dB, it runs quietly in the background, ensuring that your kitchen remains peaceful even during operation. This is especially beneficial in open-plan living spaces.

The dishwasher also features a user-friendly control panel with an intuitive display, allowing you to select cycles easily and monitor progress. The delay timer function enables users to set the washer to run at a convenient time, further enhancing its practicality.

Safety is a priority with the JLBIDW 1200. It is equipped with a child lock feature, preventing accidental interruptions during operation. Additionally, the appliance includes a flood protection system, which adds a layer of safety against any potential water leaks.

In summary, the John Lewis JLBIDW 1200 is a reliable, efficient, and feature-rich integrated dishwasher that meets the needs of today's households. Its combination of advanced cleaning technology, spacious design, and energy efficiency make it a top contender for anyone looking to upgrade their kitchen appliances.
Top Page Image Contents