John Lewis JLBIDW 1200 Multi-tab function, Activation/deactivation of the rinse aid dispenser

Page 10

Multi-tab function

This appliance is equipped with the Multi-tab function, that allows the use of the combi detergent tablets with a combined cleaning, rinsing and salt function (“3 in 1”, “4 in 1” etc...).

Before using the Multi-tab function, check that the water hardness level in your area complies with the detergent manufacturers recommendations.

This function can be selected with all washing programmes.

With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

Select the Multi-tab function before the set of a washing programme.

Once selected this option (indicator light illuminated) it will remain active also for the following washing programmes.

With the use of the Multi-tab function, the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated.

NOTE: Once the programme is running, the Multi-tab function can NO longer be changed. If you want to exclude the Multi-tab function you have to cancel the programme setting (see chapter "Starting a washing programme" - "Cancel a washing programme in progress") and then deactivate the Multi-tab function.

In this case you have to set a washing programme (and desired options) again.

Activation/deactivation of the Multi-tab function

The dishwasher must be switched off

1.Press the On/Off button.The indicator lights of the programme selection buttons will illuminate (setting mode). If only one programme selection button indicator light is illuminated this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the set programme button starts flashing.After about 2 seconds the indicator lights of all the programme selection buttons will illuminate; this means that the set washing programme has been cancelled and the machine is now in setting mode.

2.Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1, 2, 3 and 4 start flashing.

3.Press function button 4, the indicator lights of function buttons 1, 2 and 3 turn off while the indicator light of function button 4 goes on flashing.

4.Press function button 4 again, the "Multi-tab" indicator light illuminates, indicating that the "Multi-tab function" is active.

To deactivate the function press function button 4 again, the indicator light turns off.

3 in1 function active

indicator light on

 

 

3 in 1 function not active

indicator light off

 

 

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

NOTE: if the drying results are not satisfactory we suggest that you activate the rinse aid dispenser.

The activation/deactivation of the rinse aid dispenser can only be possible with the Multi-tab function active.

Activation/deactivation of the rinse aid dispenser

The dishwasher must be switched off

When the rinse aid dispenser has been activated, the rinse aid indicator light on the control panel is automatically activated.

1.Press the On/Off button.The indicator lights of the programme selection buttons will illuminate (setting mode). If only one programme selection button indicator light is illuminated this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3 for about 2 seconds, the indicator light of the set programme button starts flashing.After about 2 seconds the indicator lights of all the programme selection buttons will illuminate; this means that the set washing programme has been cancelled and the machine is now in setting mode.

2.Press simultaneously function buttons 2 and 3, until the indicator lights of function buttons 1, 2, 3 and 4 start flashing.

3.Press function button 2, the indicator lights of function buttons 1, 3 and 4 turn off while the indicator light of function button 2 goes on flashing, the digital display indicates the current setting.

Rinse aid dispenser deactivated

Rinse aid dispenser activated

4.To change the setting, press function button 2 again, the digital display indicates the new setting.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 152953 25/0 Maintenance and cleaning Service InstallationChild safety UseEcological hints Environmental informationFor polyoxymethylene, e.g. plastic clips Contents Control panel Description of the applianceUpper basket stop Water hardness dial Salt container Rating plateElectrical connection InstallationTechnical specifications Green andYellow Earth Blue- Neutral Brown- LiveWater outlet hose connection Permanent connectionWater supply connections Remove all packaging before positioning the machineFixing to the adjacent units Building-inLevelling We therefore advise you to remove itControl panel Multi-tab function Dishwasher must be switched offActivation/deactivation of the rinse aid dispenser Deactivation/activation of the audible signals Audible signalsFactory setting audible signals activated Water softener Setting manuallyBefore using your dishwasher for the first time Replace the lower basketTo fill Setting electronicallyFilling with dishwasher salt ExampleFilling with rinse aid Adjusting the doseRinse aid Open the container byStart the wash programme Using the dishwasherLoading cutlery and dishes Are not suitableLower basket Cutlery basketTo move to the higher position proceed as follows Adjusting the height of the upper basketUpper basket Pull out the basket until it stopsFill with detergent Use of detergentClose the lid and press until it locks in place Concentrated detergent Different kinds of detergentDetergent tablets Use of 3 in 1 combi detergentsPartial load to be Washing programmesAny DayTurn on the water tap Press the On/Off button To cancel a delay start in progressEnd of the washing programme Unloading the dishwasher Frost precautions Maintenance and cleaningCleaning the filters Moving the machineThere are problems when operating the dishwasher Flashing fault code appearsSomething not working Wash results are not satisfactory Repairs After Sales ServiceDishes are not clean Spare partsPage Page John Lewis Partnership Victoria Street London SW1E 5NN

JLBIDW 1200 specifications

The John Lewis JLBIDW 1200 is a high-performance integrated dishwasher that combines cutting-edge technology with user-friendly features, making it an ideal addition to modern kitchens. This appliance stands out due to its sleek design and efficient functionality, catering to the demands of busy households.

One of the main features of the JLBIDW 1200 is its impressive energy efficiency. With an A++ energy rating, it minimizes electricity consumption while delivering powerful cleaning performance. This not only helps reduce utility bills but also makes it an environmentally friendly choice for the eco-conscious consumer.

The dishwasher boasts a generous capacity, accommodating up to 12 place settings. This space-efficient design allows you to handle extensive washing loads, making it perfect for family dinners or gatherings. The interior of the JLBIDW 1200 is thoughtfully designed with adjustable shelves and racks, allowing for optimal placement of various dishware, from tall pots to delicate glassware.

The JLBIDW 1200 incorporates advanced washing technologies that enhance its cleaning capabilities. With multiple wash programs, including intensive, normal, and eco modes, it offers flexibility to cater to different cleaning needs. The quick wash option is particularly useful for those in a rush, providing a fast and efficient clean in just 30 minutes.

One of the standout characteristics of this model is its quiet operation. With a noise level of just 47 dB, it runs quietly in the background, ensuring that your kitchen remains peaceful even during operation. This is especially beneficial in open-plan living spaces.

The dishwasher also features a user-friendly control panel with an intuitive display, allowing you to select cycles easily and monitor progress. The delay timer function enables users to set the washer to run at a convenient time, further enhancing its practicality.

Safety is a priority with the JLBIDW 1200. It is equipped with a child lock feature, preventing accidental interruptions during operation. Additionally, the appliance includes a flood protection system, which adds a layer of safety against any potential water leaks.

In summary, the John Lewis JLBIDW 1200 is a reliable, efficient, and feature-rich integrated dishwasher that meets the needs of today's households. Its combination of advanced cleaning technology, spacious design, and energy efficiency make it a top contender for anyone looking to upgrade their kitchen appliances.
Top Page Image Contents