John Lewis JLDWW 1203 instruction manual Electrical connection, Permanent connection

Page 10

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent per- son.

1 WARNING: THIS APPLIANCE

MUST BE EARTHED.

Should the appliance power supply cable need to be replaced, this must be carried out by a Service Force agent (see page 29).

The manufacturer declines any responsibility should this safety measure not be observed.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance´s rating plate. (See picture on page 5).

The appliance is supplied with a 13amp plug fitted.

In the event of having to change the fuse in the plug sup- plied, a 13amp ASTA approved BS I363/A fuse must be used.

Should the plug need to be replaced for any reason, pro- ceed as described below. The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue

- Neutral

Brown

- Live

 

Green & Yellow

BlueBrown

Cord Clamp

If you fit your own plug, the colours of the wires in the mains lead of your appliance may not correspond with the markings identifying the terminals in your plug.

Proceed as follows:

1.Connect the Green and Yellow (earth) wire to the termi- nal in the plug which is marked with the letter "E" or the earth symbol or coloured green and yellow.

2.Connect the Blue (neutral) wire to the terminal in the plug which is marked with the letter "N" or coloured black.

3.Connect the Brown (live) wire to the terminal in the plug which is marked with the letter "L" or coloured red.

4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

1 WARNING:

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

1 The plug must still be accessible after the ap- pliance has been installed.

1 The appliance should not be connected to the electrical supply by means of an extension ca- ble.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm be- tween the switch contacts and of a type suitable for the re- quired load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Child Safety Important Safety InformationInstallation UseEcological hints Maintenance and cleaning ServiceEnvironmental Information Contents Description of the Appliance Installation Technical DataWater connections UnpackingWater outlet hose connection Connecting Systems Fitting under a counterLevelling the Dishwasher Proceed as followsPermanent connection Electrical connectionGreen and Yellow Earth Blue Neutral Brown Live Control Panel Multi tab button Control indicator lightsDelay start button Half load buttonWhen the dishwasher is first installed Water SoftenerSetting electronically Setting the Water SoftenerSetting manually Filling with dishwasher saltRinse Aid Adjusting the doseFilling with rinse aid Ti tab on factory setting Using the Dishwasher Loading Cutlery and DishesLower basket Cutlery basketUpper basket Maximum height of dishes Adjusting the Height of the Upper BasketAdding detergent Raising / Lowering the upper basketUse of combi tablet detergents Different kinds of detergentConcentrated Detergents Detergent TabletsAuto Washing programmesTion EconomySwitching off the dishwasher Setting the delay timerCancelling a delay start Starting a washing programmeUnloading the dishwasher Cleaning the Spray Arm Jets Maintenance and cleaningCleaning the Filters Before cleaning assure that the machine is switched offMoving the machine Frost precautionsProlonged periods of non-opera- tion Upper basket spray armFlashing fault code appears Something Not WorkingDishes are not clean Wash results are not satisfactory0870 Page Page John Lewis Partnership

JLDWW 1203 specifications

The John Lewis JLDWW 1203 is a highly regarded integrated dishwasher designed to meet the diverse needs of modern households. With its sleek and unobtrusive design, this appliance seamlessly fits into your kitchen cabinetry, ensuring a polished and cohesive look. One of the standout features of the JLDWW 1203 is its capacity, which can accommodate up to 12 place settings. This makes it an ideal choice for families or those who frequently entertain guests, allowing you to handle large loads efficiently.

This model incorporates several innovative technologies to enhance its performance. One of its key features is the energy-efficient motor, which not only reduces energy consumption but also minimizes noise levels. Operating at a low noise level, the JLDWW 1203 is perfect for open-plan living spaces where silence is essential. It boasts an A++ energy rating, signifying its commitment to sustainability while still delivering powerful cleaning results.

The JLDWW 1203 offers a variety of wash programs designed for specific needs. With options such as Eco, Intensive, and Quick Wash, you can choose the most suitable cycle depending on the degree of soiling or the urgency of your dishwashing requirements. The Quick Wash program is particularly valued for its ability to clean lightly soiled dishes in under 30 minutes, providing convenience when time is of the essence.

Another notable characteristic is its adjustable racking system. The upper basket can be repositioned to accommodate taller items, ensuring optimal usage of the interior space. Additionally, the lower basket features foldable tines, offering flexibility for various dishware sizes and shapes. This thoughtful design promotes easy loading and unloading, effectively maximizing the dishwasher’s capacity.

Safety is also a priority with the JLDWW 1203, equipped with features such as a child lock to prevent accidental operation. It is designed with a robust build quality, ensuring longevity and reliable performance over time.

In summary, the John Lewis JLDWW 1203 combines functionality, efficiency, and style, making it a superb choice for those seeking a dependable integrated dishwasher. Its array of features, advanced technologies, and user-friendly design stand out, reinforcing its reputation in kitchens across the UK.
Top Page Image Contents