John Lewis JLDWW 1203 instruction manual Something Not Working, Flashing fault code appears

Page 27

Something Not Working

If the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Force agent.

IMPORTANT: If the END light flashes and an alarm code is displayed, switch the machine off and call the telephone number given below.

IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

...a flashing fault code appears

If one of the following fault codes is displayed in the multi-display during operation:

–Fault codeÅ 10 (Problems with water inlet),

–Fault codeÅ 20 (Problems with water drainage), please have a look at the following table.

When the fault is remedied, press the button for the cycle that has started. The cycle will continue.

With other fault codes (“Å ” followed by a number):

–Cancel the dishwashing cycle.

–Switch the appliance off and on again.

–Re-set the dishwashing cycle.

If the fault is displayed again, please contact your local Serv- ice Force Centre and inform them of the fault code.

Symptom

Possible cause

Solutions

 

 

 

 

The water tap is blocked or furred with

Clean the water tap.

 

limescale.

 

 

The water tap is turned off.

Turn the water tap on.

 

 

 

 

The filter (where present) in the

 

The cycle indicator for the selected

threaded hose fitting at the water inlet

Clean the filter in the threaded hose fitting.

dishwashing cycle is flashing:

valve is blocked.

 

fault code Å 10 is displayed in the mul-

 

 

 

Cancel the dishwashing cycle (see chapter:

ti-display:

 

Filters in the base of the dishwasher

Starting a washing programme), clean fil-

(Problems with water inlet)

compartment are blocked.

ters (see chapter: Cleaning the filters),

 

 

 

then start the washing programme again.

 

 

 

 

The water inlet hose

 

 

has not been correctly laid or it is bent

Check the water inlet hose connection.

 

or squashed.

 

 

 

 

The cycle indicator for the selected

The sink spigot is blocked.

Clean out the sink spigot.

dishwashing cycle is flashing,

 

 

The water drain hose

 

fault code Å 20 is displayed in the mul-

Check the water drain hose connection.

ti-display.

has not been correctly laid or it is bent

or squashed.

 

(Problems with water drainage)

 

 

 

 

 

 

 

 

First shut off the water tap, then switch off

Fault code Å 30 is displayed in the mul-

The anti-flood system has been trig-

the appliance and contact our extended

ti-display.

gered.

warranty administrators, refer to Repairs -

 

 

After Sales Service on page 29.

 

 

 

Once the checks have been carried out, close the door and press the button of the programme that was running before the in- tervention of the alarm.The programme will continue from the point at which it was interrupted. If the fault code reappears or if another fault code not described above appears contact our extended warranty administrators, refer to Repairs - After Sales Service on page 29.

1 Attention: once having verified which kind of mal- function has occurred, before carrying out the checks the appliance MUST be switched off.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Page Use Important Safety InformationInstallation Child SafetyMaintenance and cleaning Service Ecological hintsEnvironmental Information Contents Description of the Appliance Technical Data InstallationUnpacking Water connectionsWater outlet hose connection Fitting under a counter Connecting SystemsProceed as follows Levelling the DishwasherElectrical connection Permanent connectionGreen and Yellow Earth Blue Neutral Brown Live Control Panel Half load button Control indicator lightsDelay start button Multi tab buttonWater Softener When the dishwasher is first installedFilling with dishwasher salt Setting the Water SoftenerSetting manually Setting electronicallyAdjusting the dose Rinse AidFilling with rinse aid Ti tab on factory setting Loading Cutlery and Dishes Using the DishwasherCutlery basket Lower basketUpper basket Raising / Lowering the upper basket Adjusting the Height of the Upper BasketAdding detergent Maximum height of dishesDetergent Tablets Different kinds of detergentConcentrated Detergents Use of combi tablet detergentsEconomy Washing programmesTion AutoStarting a washing programme Setting the delay timerCancelling a delay start Switching off the dishwasherUnloading the dishwasher Before cleaning assure that the machine is switched off Maintenance and cleaningCleaning the Filters Cleaning the Spray Arm JetsUpper basket spray arm Frost precautionsProlonged periods of non-opera- tion Moving the machineSomething Not Working Flashing fault code appearsWash results are not satisfactory Dishes are not clean0870 Page Page John Lewis Partnership

JLDWW 1203 specifications

The John Lewis JLDWW 1203 is a highly regarded integrated dishwasher designed to meet the diverse needs of modern households. With its sleek and unobtrusive design, this appliance seamlessly fits into your kitchen cabinetry, ensuring a polished and cohesive look. One of the standout features of the JLDWW 1203 is its capacity, which can accommodate up to 12 place settings. This makes it an ideal choice for families or those who frequently entertain guests, allowing you to handle large loads efficiently.

This model incorporates several innovative technologies to enhance its performance. One of its key features is the energy-efficient motor, which not only reduces energy consumption but also minimizes noise levels. Operating at a low noise level, the JLDWW 1203 is perfect for open-plan living spaces where silence is essential. It boasts an A++ energy rating, signifying its commitment to sustainability while still delivering powerful cleaning results.

The JLDWW 1203 offers a variety of wash programs designed for specific needs. With options such as Eco, Intensive, and Quick Wash, you can choose the most suitable cycle depending on the degree of soiling or the urgency of your dishwashing requirements. The Quick Wash program is particularly valued for its ability to clean lightly soiled dishes in under 30 minutes, providing convenience when time is of the essence.

Another notable characteristic is its adjustable racking system. The upper basket can be repositioned to accommodate taller items, ensuring optimal usage of the interior space. Additionally, the lower basket features foldable tines, offering flexibility for various dishware sizes and shapes. This thoughtful design promotes easy loading and unloading, effectively maximizing the dishwasher’s capacity.

Safety is also a priority with the JLDWW 1203, equipped with features such as a child lock to prevent accidental operation. It is designed with a robust build quality, ensuring longevity and reliable performance over time.

In summary, the John Lewis JLDWW 1203 combines functionality, efficiency, and style, making it a superb choice for those seeking a dependable integrated dishwasher. Its array of features, advanced technologies, and user-friendly design stand out, reinforcing its reputation in kitchens across the UK.
Top Page Image Contents