John Lewis JLDWW 1203 instruction manual Starting a washing programme, Setting the delay timer

Page 23

Starting a washing programme

Check that the baskets have been loaded correctly and that the spray arms can rotate freely.

Turn on the water tap.

Close the dishwasher door.

Press the ON/OFF button.

Select the desired cycle.

The cycle indicator and the respective cycle stages in the cy- cle progress display will be illuminated. The remaining time expected for the cycle will be shown in the multi-display.

The selected cycle will begin after approximately 3 seconds. The current stage of the cycle is always shown in the cycle progress display.

3During the dishwashing cycle, the remaining time shown in the multi-display may be adjusted according to the size of the load, degree of soiling, etc.

Interrupting or cancelling a washing programme in progress

1 Interrupt or cancel a washing programme in progress only if it is absolutely necessary.

Interrupting or Cancelling a washing programme by opening the dishwasher door:

1 Hot steam may escape when the door is opened. There is a risk of scalding.

–Open the door carefully. The programme will stop.

–Close the door. The programme will start from the point at which it was interrupted.

Cancelling a washing programme in progress

To cancel a washing programme you have to reset the dish- washer; press simultaneously function buttons 1 and 2 and keep them pressed.

The programme display for the current cycle will flash for several seconds and then go out.

Release the function buttons. The running programme has been cancelled.

If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

This option must be linked to the selection of a washing programme. (Programmes with this option are indicated in the chapter "Selecting the dishwasher cycle").

When selected, a back light will illuminate "Half load".

Load the dishes into both baskets (upper basket and lower basket).

When using this option we recommend to reduce the dose of detergent that is normally used for a complete load.

Setting the delay timer

3With the delay timer you can delay the start of a dishwashing cycle for between 1 and 19 hours.

1.Press the delay timer button repeatedly until the multi- display shows the desired time delay, for example 12h, if the cycle is to start in 12 hours. The delay timer indicator is illuminated.

2.Select dishwashing cycle.

3.The time remaining to the start of the cycle is continu- ously displayed (e. g. 12h, 11h, 10h, … 1h etc.).

Cancelling a delay start

To cancel a delay start in progress you have to reset the dishwasher; follow the same instructions given in "Cancel a washing programme in progress". Cancelling a delay start in- volves also the cancelling of the washing programme set.

In this case you have to set the washing programme again.

To change the time delay:

As long as the cycle has not yet started, you can still change the setting by pressing the DELAY TIMER button.

Cancelling the time delay:

Press the Delay Timer button repeatedly until the length of the selected cycle appears in the multi-display. The selected dishwashing cycle will begin immediately.

To change a dishwashing cycle

As long as the cycle has not yet started, you can still change the dishwashing cycle. First cancel the dishwashing cycle, then reset the time delay, lastly select the new dishwashing cycle.

Switching off the dishwasher

Only switch the dishwasher off when the multi-display indi- cates “0” for the cycle time remaining and the end of pro- gramme indicator is illuminated.

With some dishwashing cycles, the drying fan continues to run even after the end of the cycle.

1.Press the ON/OFF button. All display indicators will go out.

"Half load" button

This option is useful and economical when only a small load needs washing reducing the consumption of water and en- ergy.

2.Turn off the water tap.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Page Use Important Safety InformationInstallation Child SafetyEnvironmental Information Maintenance and cleaning ServiceEcological hints Contents Description of the Appliance Technical Data InstallationWater outlet hose connection UnpackingWater connections Fitting under a counter Connecting SystemsProceed as follows Levelling the DishwasherGreen and Yellow Earth Blue Neutral Brown Live Electrical connectionPermanent connection Control Panel Half load button Control indicator lightsDelay start button Multi tab buttonWater Softener When the dishwasher is first installedFilling with dishwasher salt Setting the Water SoftenerSetting manually Setting electronicallyFilling with rinse aid Adjusting the doseRinse Aid Ti tab on factory setting Loading Cutlery and Dishes Using the DishwasherCutlery basket Lower basketUpper basket Raising / Lowering the upper basket Adjusting the Height of the Upper BasketAdding detergent Maximum height of dishesDetergent Tablets Different kinds of detergentConcentrated Detergents Use of combi tablet detergentsEconomy Washing programmesTion AutoStarting a washing programme Setting the delay timerCancelling a delay start Switching off the dishwasherUnloading the dishwasher Before cleaning assure that the machine is switched off Maintenance and cleaningCleaning the Filters Cleaning the Spray Arm JetsUpper basket spray arm Frost precautionsProlonged periods of non-opera- tion Moving the machineSomething Not Working Flashing fault code appearsWash results are not satisfactory Dishes are not clean0870 Page Page John Lewis Partnership

JLDWW 1203 specifications

The John Lewis JLDWW 1203 is a highly regarded integrated dishwasher designed to meet the diverse needs of modern households. With its sleek and unobtrusive design, this appliance seamlessly fits into your kitchen cabinetry, ensuring a polished and cohesive look. One of the standout features of the JLDWW 1203 is its capacity, which can accommodate up to 12 place settings. This makes it an ideal choice for families or those who frequently entertain guests, allowing you to handle large loads efficiently.

This model incorporates several innovative technologies to enhance its performance. One of its key features is the energy-efficient motor, which not only reduces energy consumption but also minimizes noise levels. Operating at a low noise level, the JLDWW 1203 is perfect for open-plan living spaces where silence is essential. It boasts an A++ energy rating, signifying its commitment to sustainability while still delivering powerful cleaning results.

The JLDWW 1203 offers a variety of wash programs designed for specific needs. With options such as Eco, Intensive, and Quick Wash, you can choose the most suitable cycle depending on the degree of soiling or the urgency of your dishwashing requirements. The Quick Wash program is particularly valued for its ability to clean lightly soiled dishes in under 30 minutes, providing convenience when time is of the essence.

Another notable characteristic is its adjustable racking system. The upper basket can be repositioned to accommodate taller items, ensuring optimal usage of the interior space. Additionally, the lower basket features foldable tines, offering flexibility for various dishware sizes and shapes. This thoughtful design promotes easy loading and unloading, effectively maximizing the dishwasher’s capacity.

Safety is also a priority with the JLDWW 1203, equipped with features such as a child lock to prevent accidental operation. It is designed with a robust build quality, ensuring longevity and reliable performance over time.

In summary, the John Lewis JLDWW 1203 combines functionality, efficiency, and style, making it a superb choice for those seeking a dependable integrated dishwasher. Its array of features, advanced technologies, and user-friendly design stand out, reinforcing its reputation in kitchens across the UK.
Top Page Image Contents