5 Configuration and Operation
This chapter describes how you can start up and manage the components installed with the integration package.
In NetView you can automatically search your network for any network compo- nents in the “managed objects” (Discovery). With Discovery, NetView accesses the SNMP agents and assigns corresponding default symbols to the various device types.
The components found are entered in the submap of the relevant device (e.g. IP interfaces or network cards).
5.1Configuring Fujitsu Siemens Servers with the Map Application
Fujitsu Siemens PRIMERGY servers must be configured for the following reasons:
–The servers should be visibly distinguishable from other devices in the map.
–The status of the ServerView agents should be mapped to appropriate component symbols in the map.
IFujitsu Siemens servers can be configured only in a map with read/write privileges. The Map application makes changes to the objects and symbols in the NetView map.
Integration in Tivoli NetView | 33 |