
Applications | Components |
The ServerView MIBs are installed in the directory \usr\ov\snmp_mibs\fujitsuSi- emens. The inventory MIB Invent.mib is loaded during the installation so that the Data Collection with the status variable SniInvCondition can be installed from this MIB.
4.4Applications of ServerView Integration in NetView
This section describes the applications available on installing the integration package.
4.4.1Poll Application
The Poll application searches the network for Fujitsu Siemens PRIMERGY servers on which ServerView agents have been installed. The Poll application sets the ServerViewObj capability for all the ServerView servers it finds.
The object IDs, which specify the path when searching the network for ServerView devices, are defined in the configuration file \usr\ov\bin\Server- ViewPoll.cfg.
4.4.2Map Application
The Map application configures a network node that was identified by the Poll application as a Fujitsu Siemens PRIMERGY server for the status display in the NetView map.
The following properties are set by the Map application:
–The properties of the network nodes are set to that of a PRIMERGY server.
–Submaps are created on each network node.
–Icons with symbol properties of the ServerView software are created in the submaps.
4.4.3Reset Function
The Reset function can be used to undo the configuration of one or all PRIMERGY servers (i.e., to reset the configuration by the Map application).
30 | Integration in Tivoli NetView |