3D Connexion TivoII manual Snmp Configuration, Automatic Reactions

Configuration and Operation Status Indication in Map

This is needed, for example, if the server is no longer accessible via SNMP (the SNMP agent is not running) and you want to prevent the server from being constantly displayed as a “faulty device” in the map.

5.2.6SNMP Configuration

The parameters you set here are used by the Poll application.

IPlease make sure that you also read the details on selecting SNMP parameters in the section “Automatic Search and Configuration of all Fujitsu Siemens Servers” on page 37.

Figure 21: Configuration of SNMP parameters in NetView

5.2.7Automatic Reactions

In the NetView event configuration, you can set various automatic reactions to be triggered when a trap is received from the ServerView MIBs. This includes:

–Logging of the event in the NetView event log file (Event Log Message)

–Forwarding of the event (Forward Event)

–Displaying a pop-up window with information on the trap that was received (Popup Notification)

–Issuing any shell command (Command for Automatic Action)

Integration in Tivoli NetView 43