Margaritaville DM3000 user manual Making frozen Drinks

Making frozen

drinks

And now for the fun part! You are just a few short steps away from enjoying your perfectly blended, restaurant-style frozen drink. Before you use your Frozen Concoction Maker™ for the first time, we recommend that you read through these simple steps to get to know the features of this unit. Before you know it, you’ll be whipping up perfect drinks for your guests!

preparing the unit for use

1. Place the unit on a clean, dry, flat surface.

2. If Ice Reservoir is not yet installed, place the Ice Reservoir on the unit front first, then push down firmly on the back to click it into place. (Figure 1)

NOTE: IF THE ICE RESERVOIR IS NOT SEATED FIRMLY IN PLACE, THE SHAVER UNIT WILL NOT OPERATE.

3. Remove the Power Cord Storage Door at the back of the unit by pushing down on the release tab. Remove the Power Cord and plug into a standard 120-volt socket (Figure 2). Replace the Power Cord Storage Door, and position the Power Cord in the slot provided.

Adding Ice to the Ice Reservoir

4. Remove the Ice Reservoir Lid by rotating it counter-clockwise and lifting up. (Figure 3)

5. Fill the Ice Reservoir with ice cubes to the “Ice Level” Line (Figure 4).

NOTE: FOR BEST RESULTS, USE ICE THAT HAS BEEN OUT OF THE FREEZER FOR 10 TO 15 MINUTES.

6. Replace the Ice Reservoir Lid by rotating it clockwise back into place. (Figure 5)

Figure 1

Figure 2

Figure 3

Figure 5 Figure 4

-5-