Multiquip CX600HF, CX100HFE, CX300HF, CX400HFE CX-HF Series Hand Mixers Rules for Safe Operation

Page 7

CX-HF SERIES HAND MIXERS — RULES FOR SAFE OPERATION

■DO NOT spray water onto electric motor. Do not expose equipment to rain or wet conditions. Water entering the equipment will increase the risk of electric shock.

■Double-insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit on a polarized outlet only one way.If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.Double insulation eliminates the need for the three- wire grounder power cord and grounded power supply system.

■AVOID body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

■When operating a power tool outside, use an outdoor extension cord marked "W-A" or "W".These cords are rated for outdoor use and reduce the risk of electric shock.

■Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the equipment may result in personal injury.

■Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the equipment in unexpected situations.

■Do not force any tool.Use correct tool for your application.The correct tool will do the job better and safer at the rate for which it is designed.

■Do not use the equipment if switch does not turn on or off. Any equipment that cannot be controlled with a switch is dangerous and must be repaired.

■Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the operation of the equipment. If damaged, have the equipment serviced before using. Poorly-maintained equipment can cause accidents.

■Do not use the equipment in an environment with potentially explosive atmosphere. Do not mix any solvents or solvent- containing substances with a flash point of below 69° F (21° C).

■Make sure that the current voltage indicated on the rating plate corresponds to the main power supply.

■Position the cord clear of the rotating mixing paddle. Do not wrap the cord around arm, wrist or other body parts.This can cause injury.

■Start up or run down the machine in the mixing container only. Make sure that the mixing container is placed in a firm and secure position.

Maintenance Safety

■NEVER lubricate components or attempt service on a running machine.

■ALWAYS allow the machine a proper amount of time to cool before servicing.

■Keep the machinery in proper running condition.

■Fix damage to the machine immediately and always replace broken parts, or missing decals.

■Dispose of hazardous waste properly.

■DO NOT use food or plastic containers to dispose of hazardous waste.

Emergencies

■ALWAYS know the location of the nearest fire extinguisher and first aid kit.

■In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

CX-HF SERIES MIXERS — OPERATION AND PARTS MANUAL — REV. #3 (03/11/08) — PAGE 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Collomix Silicosis Warning CX-HF Hand Mixers SILICOSIS/RESPIRATORYWARNINGSCX-HF Hand Mixers Table of Contents Direct TOLL-FREE access to our Parts Department CX-HF Series Hand Mixers Safety Message Alert Symbols CX-HF Series Hand Mixers Rules for Safe Operation General SafetyCX-HF Series Hand Mixers Rules for Safe Operation CX-HF Series Hand Mixers Symbols Used CX-HF Series Specifications Application CX-HF Series Hand Mixers General InformationCX-HF Series Hand Mixers General Information CX-HF Series Hand Mixers Components Assembly CX-HF Series Hand Mixers SetupCX-HF Series Hand Mixers Operation Clean the machine and mixing tool after every use CX-HF Series Hand Mixers MaintenanceExplanation of Code in Remarks Column Sample Parts ListCX-HF Series Hand Mixers Suggested Spare Parts CX100 Hand Mixer Mixer Assembly Part Name QTY Remarks CX100 Hand Mixer Mixer Assembly Circlip CX300 Hand Mixer Mixer Assembly Part Name CX300 Hand Mixer Mixer Assembly Circlip A15 CX400 Hand Mixer Mixer Assembly Part Name QTY CX400 Hand Mixer Mixer Assembly Part Name QTY. Remarks CX600 Hand Mixer Mixer Assembly CX600 Hand Mixer Mixer Assembly 30107 11130 3060 175 17439 105 103 101 100116 117 118 120119 Circlip A15 X1,5 Terms and Conditions of Sale Parts Terms and Conditions of Sale Stow Construction EquipmentPage HERE’S HOW to GET Help

CX600HFE, CX400HFE, CX300HF, CX100HFE, CX100HF specifications

Multiquip, a renowned name in the construction and industrial equipment sector, has developed an impressive range of generators, including the CX600HF, CX100HF, CX100HFE, CX300HF, and CX400HFE models. Each of these generators comes equipped with advanced technologies and features designed to meet diverse power needs, ensuring reliability, efficiency, and user-friendly operation.

The CX600HF is the powerhouse of the lineup, delivering a robust 6000 watts of continuous power. This model is ideal for heavy-duty applications, featuring a heavy-duty frame that enhances durability and performance. Its advanced inverter technology ensures clean power output, making it suitable for sensitive electronic equipment. The CX600HF also incorporates an easy-to-read digital display that provides crucial information about voltage, current, and hours of operation for user convenience.

Following closely, the CX100HF generator is designed for versatility and portability. Weighing in at a more manageable size, it generates up to 1000 watts, making it perfect for light construction work and outdoor events. This model boasts a quiet operation feature, which is particularly beneficial for use in residential areas or during nighttime. Additionally, it incorporates low oil shut-off protection, enhancing engine life and minimizing maintenance costs.

The CX100HFE adds another layer of functionality with its electric start, making power generation even more accessible. This enhancement reduces the physical effort required to start the generator, especially important in challenging conditions. Like its counterpart, the CX100HF, it also maintains an eco-friendly profile with low emissions, aligning with modern environmental standards.

The CX300HF generator is designed for medium-duty applications, providing a balanced mixture of power and portability. This model can generate up to 3000 watts, making it suitable for construction sites or as a backup power solution for homes. Its user-friendly interface includes multiple outlets to accommodate various devices, ensuring that users can connect several tools or appliances simultaneously.

Lastly, the CX400HFE offers enhanced efficiency with its hybrid design, combining both gas and propane fuel options. This flexibility allows users to choose the most convenient or economical fuel type for their needs. The CX400HFE is equipped with a sound attenuated enclosure, reducing noise levels significantly, which is a considerable advantage in crowded job sites.

In conclusion, Multiquip’s lineup of CX generators represents a commitment to quality and innovation. Each model is developed with specific user needs in mind, offering features that enhance performance, portability, and environmental friendliness. Whether for commercial, residential, or emergency usage, these generators provide reliable power solutions that adapt to various requirements.
Top Page Image Contents