FULL OVERLAY PANEL INSTALLATION INSTRUCTIONS
Step 9: Secure overlay panel to the door.
With the #8 wood screws provided fasten the overlay panel to the door. (See Figure 7).
Step 10: Install lock cam (Models with locks only). Attach the lock cam to the back of the lock assembly with the phillips head machine screw provided. Orient the lock cam vertically when installing on the lock.
Step 11: Install door gasket
Press the door gasket into the door channel. Make certain the gasket corners are fully inserted. If applicable insert the key into the lock and make certain the lock operates properly.
Step 12: Install the door
Install the top and bottom hinge adapter bushings back into the hinge adapters that were removed in step 6. Install the door by reversing the procedure from step 2. Install the top hinge pin so the screw head is flush with the top surface of the hinge. If applicable insert key into lock and verify the lock cam works properly with the catch bracket on the front of the refrigerator cabinet.
Clearance hole through door gasket channel
#8 Wood Screw
Back of door
Figure 7
Top hinge pin | Top hinge |
Top door hinge adapter
Top hinge adapter bushing
Bottom door hinge adapter
Bottom hinge adapter bushing
Bottom hinge with cam
Bottom hinge pin
Figure 8 Right hand
hinges shown
14