Remove Packaging

Your appliance has been packed for shipment with all parts that could be damaged by movement securely fas- tened. Before using, be sure all packing materials and tape have been removed.

Important

Keep your carton packaging until your appliance has been thoroughly inspected and found to be in good con- dition. If there is damage, the packaging will be needed as proof of damage in transit.

Note to Customer

This merchandise was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the carrier upon accept- ance of the shipment. As directed on the side of your packing carton, claims for loss or damage sustained in transit must be made on the carrier as follows:

Exterior Damage

Make thorough damage notation on your delivery receipt and have driver acknowledge by signature and date. Send a written request asking for an inspection report from carrier. Include the name of carrier representative and the date the inspection was requested. Retain inspection report and receipt for filing of a claim.

Concealed Damage

This must be reported to the carrier within fifteen days. Obtain inspection report from the carrier. Retain the inspection report for filing the claim. DO NOT RETURN DAMAGED MERCHANDISE TO MANUFACTURER - FILE THE CLAIM WITH THE CARRIER.

Unit Installation Location

Locate your appliance in the most convenient place near a grounded outlet. If possible, place your unit out of direct sunlight and away from heat sources such as a radiator, stove, oven, or furnace duct.

Your refrigerator has a fan-cooled condenser and can be built-in. No ventilation is required but the front grille must be kept clear for proper air movement and unit operation.

To build in, the opening must be at least 24"wide x 34- 3/4" high x 24" deep with ample provision for wiring. In addition, consideration should be given to the appli- ance's removal for routine cleaning and access to the waterline fittings.

Icemaker Plumbing

Observe and follow all local code(s) when installing appliance.

The only connection necessary to make the icemaker function is to connect the supplied copper water tube fit- ting to your home's cold water supply line.

Use ¼-inch copper water tubing only and the supplied connection fittings to connect to the water valve's ¾” garden hose fitting located at the rear of the unit. Additional connection parts are available at a local hard- ware-plumbing store. Water pressure must be at a mini- mum of 20 psi for proper operation.

Make certain all water connections are watertight after installation. Form the tubing so that it will not vibrate against the cabinet body or kink when your refrigerator is set in position.

Electrical and Grounding

The icemaker is already connected to the refrigerator's wiring. The appliance power cord must be connected to a power source of 120 Volts AC, 60 Hz, properly grounded 15 Amp circuit.

WARNING:THISUNITSHOULDNOTUNDER ANYCIRCUMSTANCES,BEBEUNGROUNDED..

ObserveCaution:and follow all local Electrical code(s) when Never pour liquids directly onto the

installing appliance.

light assembly.

6CiM specifications

Marvel Industries' 6CiM is a cutting-edge modular system designed to revolutionize the way industries approach manufacturing and production. Emanating from the heart of innovative engineering, the 6CiM stands for "Sixth Generation Cross-Industry Module," embodying the perfect blend of flexibility, efficiency, and advanced technology.

One of the standout features of the 6CiM is its modularity. This system can be easily customized and scaled according to the specific needs of various industries, including automotive, aerospace, electronics, and consumer goods. The modular components are designed for rapid assembly and disassembly, allowing businesses to pivot quickly in response to market demands or shifts in production strategy.

Technology is at the forefront of the 6CiM’s design. Equipped with state-of-the-art automation capabilities, the system leverages artificial intelligence and machine learning algorithms to optimize production processes. These technologies allow for real-time data collection and analysis, enabling predictive maintenance and reducing downtime. This intelligent approach ensures that production lines remain operational and efficient, ultimately leading to significant cost savings.

Another significant characteristic of the 6CiM is its integration of sustainable practices. Marvel Industries has prioritized eco-friendliness in its design, utilizing recyclable materials and energy-efficient components. The system’s architecture is optimized for reduced energy consumption, aligning with global initiatives to promote greener manufacturing practices.

Additionally, the 6CiM supports seamless connectivity with IoT devices, facilitating remote monitoring and control. This capability allows operators to manage production lines from anywhere in the world, enhancing productivity and flexibility.

Safety features are also paramount in the design of the 6CiM. The system includes various safeguards and automated error-checking protocols to ensure worker safety and minimize the likelihood of accidents on the shop floor.

In summary, Marvel Industries' 6CiM represents a transformative shift in modular manufacturing systems. With its customizable design, advanced automation, sustainability focus, and commitment to safety, the 6CiM is setting new standards in the manufacturing landscape, paving the way for more adaptable and efficient production environments.