Marvel Industries 3SBARE manual Sentry System Refrigeration Monitor, Off

Page 4

SENTRY SYSTEM™ REFRIGERATION MONITOR

ON

55

F

Set

Warmer

°F/C

OFF

 

Colder

Light

 

 

Sentry System™

Power Failure - Flashing Amber

High/Low Temp - Red

Press ON/OFF - Reset

Alarms OFF - Steady Amber

Figure 3

Start Your Appliance

Your appliance will start upon initial plug-in. The LED will flash amber upon initial plug-in due to your unit being powered-on at the factory to verify performance and then powered-off. The Sentry System™ refrigeration monitor senses a power outage has occurred and relays this infor- mation to you when you initially power-up your appliance. This is normal and pressing the “ON/OFF” button will reset this alarm function.

If your appliance’s control has been shut-off (i.e., unit plugged in, interior lights operate, display blank), unit must be turned on. To turn on your appliance, push and hold for five (5) seconds, the “ON/OFF” button located on the display panel (see Figure 3).

Once loaded with wine bottles, allow at least 48 hours for the unit to stabilize before making any adjustments to the initial setting.

Set Your Temperature Mode

This product can display either Fahrenheit or Celsius. To do so, press the “°F/C” button on the display panel.

Set the Controls

The available temperature range of the unit is from 40 to 65 degrees F. The temperature set point is initially set in the factory at 55 degrees F. The temperature set point can be lowered or raised by first pushing the “SET” button on the display pad. A “SET” icon will be displayed. Pushing either the “WARMER” or “COLDER” buttons located on the display pad will raise or lower the set temperature by one

(1)degree F or C (depending on your setting). As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.

Adjustable Temperature Control

The temperature control is fully adjustable from the low forties to the mid-sixties. The range allows flexibility of

temperature preferences.

Interior Light and Switch

The interior light makes it easy to view your wine labels and enhances the display of your collection. The light will always come on when the door is opened.

Warning Alarms

Your wine cellar has been fitted with a Sentry System™ refrigeration monitor. This monitor will let you know if your cellar is not functioning properly for optimum wine storage.

Door Ajar Alarm

If the door has been left open for over five (5) minutes, the alarm will sound and the LED will flash green. This will stop as soon as the door is closed.

High and Low Temperature

If your unit reaches temperatures outside normal operating temperatures for your set point for more than one (1) hour, an alarm will sound and the LED will flash red. This will warn you that your wines have seen temperatures that may not be conducive for long-term storage.

Power Failure

If your unit experiences a power failure, the LED will flash amber until the alarm is reset.

Reset Alarms

Press the “ON/OFF” button for approximately one (1) sec- ond. This will reset all audible and display alarms.

Sabbath Mode

Your beverage center is equipped with a Sabbath Mode feature. By activating this mode, you will be disabling all displays, audible alarms and lights.

To activate the Sabbath Mode, press and hold the “SET” button while pressing the “°F/C” button four (4) times within seven (7) seconds. To deactivate Sabbath Mode, repeat the process. Sabbath Mode will automatically deactivate after 72 hours.

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation Operation and Maintenance Instructions Marvel Refrigerated Beverage CenterUnpacking Your Beverage Center ReminderInstalling Your Beverage Center Ideal Ambient Temperature RangeSentry System Refrigeration Monitor OFF3SBARE Beverage Center Features 6SBARE Beverage Center Features 8SBARE Beverage Center Features Care and Cleaning of Your Beverage Center Troubleshooting Your Beverage Center Problem Possible CAUSES/SOLUTIONSObtaining Service for Your Beverage Center For Your RecordsHousehold Product Warranty 41010407 Rev. C

3SBARE specifications

Marvel Industries has made a significant mark in the world of industrial automation with its latest innovation, the 3SBARE. This state-of-the-art system brings together cutting-edge technologies, designed specifically to enhance productivity, efficiency, and safety in various manufacturing processes.

One of the standout features of the 3SBARE is its advanced sensing technology. Equipped with state-of-the-art sensors, the system can detect operating conditions in real-time. This capability allows for rapid adjustments, ensuring optimal performance while minimizing risk. The integration of smart sensors not only enhances accuracy but also plays a crucial role in predictive maintenance. By analyzing sensor data, manufacturers can foresee potential failures before they occur, thereby reducing downtime and avoiding costly repairs.

In terms of connectivity, the 3SBARE leverages Industrial Internet of Things (IIoT) technologies. This allows it to connect seamlessly with existing machinery and software, creating a fully integrated environment. The system supports multiple communication protocols, including MQTT and OPC UA, enabling it to relay data to cloud platforms or local servers for analysis. This level of connectivity is essential for achieving a comprehensive overview of operations, ultimately driving informed decision-making.

The 3SBARE system is also notable for its user-friendly interface. A touchscreen control panel provides operators with easy access to system data and analytics. This intuitive design reduces the learning curve for new staff and increases overall operational efficiency. Moreover, the interface allows for remote monitoring and control, empowering management to oversee processes from anywhere in the facility or even remotely.

Another critical characteristic is its modular design. The 3SBARE can adapt to various manufacturing environments, making it suitable for industries ranging from automotive to electronics. Companies can select specific modules based on their operational needs, ensuring they invest only in what’s necessary, thus optimizing costs.

Finally, safety features are paramount in the design of the 3SBARE. It includes emergency stop functionality, obstacle detection, and automated alerts to ensure the well-being of operators and equipment alike. This focus on safety not only complies with industry standards but also fosters a culture of safety in workplaces.

In summary, Marvel Industries’ 3SBARE stands out due to its advanced sensing capabilities, IIoT connectivity, user-friendly design, modular adaptability, and robust safety features. This innovative system is set to redefine productivity and efficiency in manufacturing, making it a game-changer in industrial automation.
Top Page Image Contents