McCall Refrigeration MCCR1-S manual Contents, Serial Number Location

Page 3

McCall

Contents

 

Serial Number

3

Receiving And Inspecting The Equipment

3

Model Numbers

4

Introduction

5

Specifications

6-7

Installation

8-9

Electronic Temperature Control Operation

10

Heated Cabinet Operation

11

Maintenance

12-13

Wiring Diagrams

14-20

Compressor Diagrams

21

Replacement Parts

22-24

Standard Labor Guidelines

25

Standard One Year Warranty

26

Additional Three Year Warranty

27

Serial Number Location

The serial number is on the identification plate that also includes the model number. A typical identification plate is shown below. On refrigeration and freezer unit the identification plate is located inside the right most door near the top front corner of the right interior wall. On heated units, the identification plate is located in the shroud area on the right side panel.

Always have the serial number of your unit available when calling for parts or service. A complete list of authorized McCall parts depots can be found at www. mccallrefrigeration.com.

©2010 McCall. All rights reserved. Reproduction without written permission is prohibited.

 

Covington, Tennessee

Model: MCCR1-S

Serial #: 0801152000599

Elec.Req.: 115V 60Hz 1Ph

Ampacity: 6.8

Refrigerant Type:

System 1

System 2

R404A

 

Refrigerant Amount:

12.5ozs.

 

Design Pressures:

450

 

High Side:

 

Low Side:

150

 

For Parts or Service Please Call: 1-800-733-8829

Receiving And Inspecting The Equipment

Even though most equipment is shipped crated, care should be taken during unloading so the equipment is not damaged while being moved into the building.

1.Visually inspect the exterior of the package an skid or container. Any damage should be noted and reported to the delivering carrier immediately.

2.If damaged, open and inspect the contents with the carrier.

3.In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment notify the carrier. Notification should be made verbally as well as in written form.

4.Request an inspection of the concealed equipment. This should be done within 10 days from receipt of the equipment.

5.Check the lower portion of the unit to be sure legs or casters are not bent.

6.Also open the compressor compartment housing and visually inspect the refrigeration package. Be sure lines are secure and base is still intact.

7.Freight carriers can supply the necessary forms upon request.

8.Retain all crating material until an inspection has been made or waived.

Uncrating the Equipment

First cut and remove the banding from around the crate. Remove the front of the crate material, use of some tools will be required. If the unit is on legs remove the top of the crate as well and lift the unit off the skid. If the unit is on casters it can be "rolled" off the skid.



Page 2 Page 4
Image 3
Page 2 Page 4
Contents Service, Installation and Care Manual Important Warning And Safety Information Contents Serial Number LocationReceiving And Inspecting The Equipment Model Numbers Series Temp Configuration Section DoorsRefrigeration System IntroductionReach-In Refrigerators Hinged Doors Standard Width & Depth SpecificationsPass-Thru Refrigerators Hinged Doors Standard Width Location InstallationPlug Configurations Electronic Temperature Control Operation Heated Cabinet Operation Power UpMaintenance Preventing blower coil corrosion MCCR1, MCCRPT1 Glass Doors MCCR1, MCCRPT1 Solid DoorsMCCR2, MCCR2-SL Glass Doors MCCRPT2, MCCR3 Solid Doors MCCRPT2, MCCR3 Glass Doors MCCF1 Solid Doors Freezer Wiring DiagramsFreezer Wiring Diagrams Refrigerator/Freezer Combination Wiring Diagram MCCH1, MCCH2, MCCH3 Solid & Glass Doors Coil, evaporator Compressor DiagramsMCCR3, MCCRPT2 Solid & Glass Doors Replacement PartsMCCR2 Solid Doors MCCR2, MCCR2-SL Solid & Glass Doors MCCRPT1 Glass DoorsMCCF3 Solid Doors MCCF2 Glass Doors MCCF1, MCCDRL2 Solid Doors MCCDRL2 Glass DoorsMCCF1 Glass Doors MCCF2 Solid DoorsAll Heated Models Shelf Replacement PartsMCCF3 Glass Doors MCCDTR1 Solid DoorsLabor Of 4 Hours To Replace Labor Of 1-Hour Is Allowed To ReplaceLabor Of 2 Hours To Replace Labor Of 3 Hours To ReplaceMcCall Series I Reach-In Manual General Conditions Thank you for choosing McCall

MCCR1-S specifications

The McCall Refrigeration MCCR1-S is a top-of-the-line refrigeration unit designed for both commercial and industrial applications. Known for its robust performance, efficiency, and reliability, this model stands out in the crowded market of refrigeration systems.

One of its main features is the impressive cooling capacity, which allows it to maintain optimal temperatures even in high-demand environments. The MCCR1-S uses advanced compressor technology, ensuring rapid cooling while minimizing energy consumption. This is particularly important for businesses looking to reduce operational costs without sacrificing performance.

Energy efficiency is further enhanced by the use of eco-friendly refrigerants that comply with modern environmental regulations. These refrigerants not only have a lower global warming potential but also contribute to lower overall energy bills. The MCCR1-S is designed with an energy-efficient system that is optimized to function effectively under various load conditions, providing consistent performance while reducing energy waste.

The MCCR1-S also boasts an intuitive control system that allows for precise temperature management. It features a user-friendly digital display that enables users to set and monitor temperatures with ease. Some models come equipped with smart connectivity, allowing users to control and monitor the refrigeration unit remotely via a mobile application. This technology enables operators to troubleshoot issues before they escalate, ensuring uninterrupted service.

In terms of durability, the MCCR1-S is built with high-quality materials that are resistant to corrosion and wear, ensuring a long lifespan. The unit is designed to endure harsh operating conditions, making it a reliable choice for various settings, including restaurants, warehouses, and distribution centers.

Additionally, the MCCR1-S features ample storage capacity, allowing businesses to store a significant amount of perishable goods. Its organization and shelving systems are designed to maximize space, making it an ideal choice for establishments with high inventory needs.

In conclusion, the McCall Refrigeration MCCR1-S combines advanced technology, energy efficiency, and robust performance, making it an essential asset for any commercial or industrial refrigeration needs. Its reliability, user-friendly features, and eco-friendly design set it apart from other models in the market, ensuring it meets the demands of modern businesses.
Top Page Image Contents