McCall Refrigeration MCCR1-S manual Plug Configurations

Page 9

McCall

Installation, continued

Electrical Connection

Refer to the amperage data list in the SPECIFICATIONS or the serial tag data and your local code or the National Electrical Code to be sure the unit is connected to the proper power source. A protected circuit of the correct voltage and amperage must be run for connection of the supply cord or permanent connection to the unit. The power must be turned off and disconnected whenever performing maintenance or repair functions.

Permanently connected units must be connected in accordance with NEC Article 422 Appliances, C-Disconnecting means. It is the responsibility of the end user to provide the disconnect means to satisfy the authority having jurisdiction.

The power cords supplied with this equipment are three-pronged plugs and must be connected to a three-pronged wall outlet for proper grounding. Do not use an adapter to connect to a two- pronged outlet. The three pronged-outlet provides a ground connection which must be used to prevent a shock hazard.

Have the wall outlet checked by a qualified electrician to be sure a proper ground is present and that the outlet provides the correct voltage and required amperage to match the rating plate.

Any power cord that is frayed or damaged should be replaced. When disconnecting the unit from the power source, do not pull on the wire. Firmly grip the plug and remove from outlet.

The plugs shown in Figure 3 are used on the various models.

McCall

Figure 3. Plug Configurations



Page 8 Page 10
Image 9
Page 8 Page 10
Contents Service, Installation and Care Manual Important Warning And Safety Information Contents Serial Number LocationReceiving And Inspecting The Equipment Model Numbers Series Temp Configuration Section DoorsRefrigeration System IntroductionReach-In Refrigerators Hinged Doors Standard Width & Depth SpecificationsPass-Thru Refrigerators Hinged Doors Standard Width Location InstallationPlug Configurations Electronic Temperature Control Operation Heated Cabinet Operation Power UpMaintenance Preventing blower coil corrosion MCCR1, MCCRPT1 Glass Doors MCCR1, MCCRPT1 Solid DoorsMCCR2, MCCR2-SL Glass Doors MCCRPT2, MCCR3 Solid Doors MCCRPT2, MCCR3 Glass Doors MCCF1 Solid Doors Freezer Wiring DiagramsFreezer Wiring Diagrams Refrigerator/Freezer Combination Wiring Diagram MCCH1, MCCH2, MCCH3 Solid & Glass Doors Coil, evaporator Compressor DiagramsMCCR2 Solid Doors MCCR2, MCCR2-SL Solid & Glass Doors Replacement PartsMCCRPT1 Glass Doors MCCR3, MCCRPT2 Solid & Glass DoorsMCCF1 Glass Doors MCCF1, MCCDRL2 Solid Doors MCCDRL2 Glass DoorsMCCF2 Solid Doors MCCF3 Solid Doors MCCF2 Glass DoorsMCCF3 Glass Doors Shelf Replacement PartsMCCDTR1 Solid Doors All Heated ModelsLabor Of 2 Hours To Replace Labor Of 1-Hour Is Allowed To ReplaceLabor Of 3 Hours To Replace Labor Of 4 Hours To ReplaceMcCall Series I Reach-In Manual General Conditions Thank you for choosing McCall

MCCR1-S specifications

The McCall Refrigeration MCCR1-S is a top-of-the-line refrigeration unit designed for both commercial and industrial applications. Known for its robust performance, efficiency, and reliability, this model stands out in the crowded market of refrigeration systems.

One of its main features is the impressive cooling capacity, which allows it to maintain optimal temperatures even in high-demand environments. The MCCR1-S uses advanced compressor technology, ensuring rapid cooling while minimizing energy consumption. This is particularly important for businesses looking to reduce operational costs without sacrificing performance.

Energy efficiency is further enhanced by the use of eco-friendly refrigerants that comply with modern environmental regulations. These refrigerants not only have a lower global warming potential but also contribute to lower overall energy bills. The MCCR1-S is designed with an energy-efficient system that is optimized to function effectively under various load conditions, providing consistent performance while reducing energy waste.

The MCCR1-S also boasts an intuitive control system that allows for precise temperature management. It features a user-friendly digital display that enables users to set and monitor temperatures with ease. Some models come equipped with smart connectivity, allowing users to control and monitor the refrigeration unit remotely via a mobile application. This technology enables operators to troubleshoot issues before they escalate, ensuring uninterrupted service.

In terms of durability, the MCCR1-S is built with high-quality materials that are resistant to corrosion and wear, ensuring a long lifespan. The unit is designed to endure harsh operating conditions, making it a reliable choice for various settings, including restaurants, warehouses, and distribution centers.

Additionally, the MCCR1-S features ample storage capacity, allowing businesses to store a significant amount of perishable goods. Its organization and shelving systems are designed to maximize space, making it an ideal choice for establishments with high inventory needs.

In conclusion, the McCall Refrigeration MCCR1-S combines advanced technology, energy efficiency, and robust performance, making it an essential asset for any commercial or industrial refrigeration needs. Its reliability, user-friendly features, and eco-friendly design set it apart from other models in the market, ensuring it meets the demands of modern businesses.
Top Page Image Contents