Vector VEC225 owner manual USE AS Cooler or Warmer, Front View

FEATURES (See Figure 1)

•Microprocessor controlled for digital accuracy.

•Pushbuttons digitally set temperature.

•Displays set temperature or current temperature in °C or °F.

•Operates upright - refrigerator style.

•Interior lamp automatically lights when door is opened.

•Use with standard household containers or ready-to use packaging.

•Rests on vehicle floor or tailgate for easy access.

•Extra-long, 7-foot, 12 volt DC power cord with 12 Volt DC plug; equipped with replaceable 10-amp fuse to protect the unit and power source.

•Durable, weather resistant construction and easy-open and close door.

•Environment-friendly CFC-free polyfoam liner.

•Cold/heat transfer to foods via temperature-efficient liner.

•Built-in heat dissipation fan with long-life, brushless motor.

•Full range user set thermostatic temperature control.

•Digital Display shows internal temperature.

•Removable door compartments.

•Removable interior shelf to allow larger packages to fit.

•Automatic shut-off to prevent overheating of unit.

•Replaceable interior lamp.

•Indoor operation using the supplied AC/DC converter.

•Compact, lightweight, completely portable - use with supplied AC/DC converter or with vehicle or boat’s 12 volt DC accessory outlet.

•Non-wearing thermoelectric system cools to approx. 40 °F or warms to approx. 120 °F from surrounding air temperature.

•Attractive stainless steel door (see cover photo)

FIGURE 1 - FRONT VIEW		REMOVABLE
LAMP SWITCH	DOOR	TRAY
INTERIOR
LAMP

CAUTIONS

•This unit is intended for use with the supplied 12 volt DC power source (converter) that can provide at least 4 amperes of current. DO NOT attempt to use with any power source that provides less than 4 amperes at 12 volts DC.

•NEVER operate unit in an enclosed space. ALWAYS ensure that there is adequate ventilation and free flow of air around the unit, so that warm air expelled by the fan (in the rear of the unit) is effectively dissipated.

•When operating the unit in a vehicle or boat cabin, adequate ventilation must be provided by an air conditioning system or open window. In a car with windows up, air temperatures can reach 150 °F.

•This unit is not designed to be built-in or recessed - this would interfere with the unit’s air dissipation system, and could cause a fire or other safety hazard.

•Use only with the supplied power cord. If cord becomes worn or damaged, discontinue use and call Vector Customer Service Department for an authorized replacement.

•Never allow the cooler/warmer or AC/DC converter to be immersed in water or other liquid. This will void the warranty.

•Make sure the AC/DC converter is connected to 110 V AC, 60 Hz power.

•Do not leave plugged in. Disconnect AC/DC converter when not in use, or when cooler is turned OFF.

USE AS COOLER OR WARMER

Figure 2 details the locations of the Digital Display and the Pushbuttons.

1.Start vehicle, or turn ignition to accessory position.

2.Insert the Power Cord’s DC plug into the converter or vehicle’s 12 volt DC accessory outlet and the other cord connector into the receptacle on rear of cooler/warmer. Refer to either CONNECTING TO THE SUPPLIED AC/DC CONVERTER or CONNECTING TO PORTABLE DC POWER SUPPLY, if required.

3.Press the ON/OFF Power Pushbutton. The Digital Display will light.

4.Press and hold down either the COOLER or WARMER button to set the desired temperature. The Digital Display will show the desired temperature.

FIGURE 2 - CONTROLS AND INDICATOR PANEL

REMOVABLE SHELF

		POWER ON/OFF PUSHBUTTON
	DIGITAL TEMPERATURE DISPLAY	WARMER PUSHBUTTON *
		COOLER PUSHBUTTON *
HINGES	* Press both buttons at same time to change from °F to °C

	NOTES: The display will automatically change back to display the current
	temperature after releasing the button.
	Pressing both COOLER and WARMER at the same time changes the display to
CONTROLS AND INDICATOR PANEL	°C or °F.

3 4