Installation Instructions

Before Using Your Ice Maker

•Remove all exterior and interior packing materials.

•Check to be sure you have all of the following parts:

•1 Ice Bucket

•1 Plastic Scoop

•25 ft. hose

•1 instruction manual

•Before connecting the ice maker to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

•Clean the interior surface and ice bucket with lukewarm water using a soft cloth.

Installation Of Your Ice Maker

•This appliance is designed to be recessed or built-in (fully recessed) or freestanding.

•Place your ice maker on a flat surface that is strong enough to support the unit when fully loaded.

•Level your ice maker by adjusting the legs at the front of the unit.

•Do not place the unit in a moist place. Too much moisture in the air will cause frost to form quickly on the evaporator, requiring more frequent defrosting of the appliance.

•Locate the ice maker away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient temperatures may also cause the ice maker not to perform properly.

•Position appliance to allow airflow through the front grill (see SKETCH 1)

SKETCH 1

Connecting the Water Supply

Improper water line connection may result in flooding. You must use a licensed plumber. Review state and local plumbing codes before installation.

•Not all of the hardware necessary for installation has been provided. It is necessary to hire a professional licensed plumber to complete the installation.

•Connect tubing (supplied with the unit) to the nearest cold water source. Connect sufficient tubing to the unit to allow the appliance to be moved freely for cleaning and service. Also, make sure that the tubing is not pinched or damaged during transportation and installation.

6	W W W . V I N O T E M P . C O M

VT - IMSW specifications

Vinotemp VT-IMSW is a sophisticated wine and beverage cooler designed for wine enthusiasts and those who appreciate chilled beverages. This innovative unit combines functionality with elegance, making it a great addition to any home, restaurant, or bar. With impressive features and technology, the VT-IMSW stands out in the crowded market of wine coolers.

One of the primary features of the Vinotemp VT-IMSW is its dual-zone temperature control. This means it has separate compartments for red and white wines, allowing users to set optimal temperatures for different types of wine. Typically, red wines are best served at slightly higher temperatures than white wines, making this feature particularly useful for collectors and connoisseurs.

The cooler has a capacity to hold up to 28 standard wine bottles, providing ample space for personal collections or entertaining guests. The unit is designed with shelves that allow for easy organization and display of bottles, enhancing both accessibility and aesthetics. The shelves are made from sturdy wood, and their sleek design adds an elegant touch to the cooler's overall appearance.

One of the standout technologies in the Vinotemp VT-IMSW is its advanced compressor cooling system. This technology ensures that the cooler maintains a consistent temperature, preventing fluctuations that could potentially harm the quality of the wine. The system operates quietly, minimizing noise interference while maintaining the ideal storage conditions.

The VT-IMSW also features a digital control panel, making it easy for users to monitor and adjust settings at their convenience. This user-friendly interface allows for precise temperature adjustments and provides updates on the current conditions within the unit.

In addition to its practical features, the Vinotemp VT-IMSW is designed with a sleek stainless steel frame and tempered glass door, showcasing your wine collection while protecting it from harmful UV rays. The internal LED lighting adds to its visual appeal, providing a soft glow that highlights the bottles without emitting heat.

Overall, the Vinotemp VT-IMSW offers a blend of style, technology, and convenience for wine aficionados. With its dual-zone cooling, ample storage capacity, advanced cooling technology, and elegant design, it stands as an outstanding choice for anyone looking to store and showcase their wine collection professionally and effectively. Whether for home use or in a commercial setting, the VT-IMSW is an investment in quality wine storage.