NormalNormalCD OperationCD Operation- cont. - cont.
-The CD player can be programmed to play up to 64 tracks (songs).
-Always press the Stop key before programming.
-Press the Program key once, the display will show the memory symbol to indicate that the set is now programmed into the CD player.
-There are different procedures for programming a CD and a MP3 CD. Read how below:
Programming Procedure For Normal Audio CD:
-Press Next or Back key to select the song you would like to program.
-Press the Program button once to confirm your selection.
-For each additional song you would like to program, repeat steps listed above. Reminder, only 64 tracks can be programmed to play at once.
-Once all songs are programmed, press the Program key. The display will now show memory to indicate you have saved a program into memory.
-Press Play key. The CD will start to spin and play your selected tracks in the program.
-To clear out your programmed tracks, simply press the Stop key. This will reset the memory and clear the program.
Programming Procedure For MP3 CD:
-Press the Next or Back key to select the Album (folder directory) number which contains the song you wish to program.
-Press the Program key to confirm.
-Press the Next or Back key to select the song number.
-Press the Program key to confirm.
-Repeat the last 4 steps, each time selecting an Album and track number to be played into your CD program.
-After a maximum of 64 tracks have been programmed, press Play key.
-To clear out the memory of your selected programmed songs, simply press the Stop key.
Text Display Mode (ID3)
-This unit is capable of displaying the “Text Information” (ID3 Tag) of an MP3 song on the LCD.
-To turn on this function, simply press and hold the Find/Display key for 2 seconds.
-To switch back to normal display mode (display track number and timer) press and hold the Find key again for 3 seconds.
13