AUVI Technologies MSW1150 manual Remote Control, Connection of Speakers, Power Supply

1
2	7
3	8
4	9
5	10
6	11
	12
13	14
15
17	16
19	18
	20

Remote Control

01.On / Off key

02.Find / M/S key

03.Timer key

04.EQ key

05.Sleep key

06.Memory down key

07.Band key

08.Intro key

09.Function key

10.Repeat key

11.Memory up key

12.Direct keys (Number keys)

13.Mute key

14.Memory / Program key

15.CD play / Pause key

16.CD Next / Tune-up key

17.CD back / Tune-down key

18.CD stop / Band key

19.Volume up key

20.Volume down key

Connection of Speakers

-Unwrap the speaker cords of both speakers.

-Insert the cables of the left speaker into the "Red" (+) and “Black” (-) speaker connectors which have the "L" indication on the backside of the unit.

-Insert the cables of the right speaker into the "Red" (+) and “Black” (-) speaker connectors which have the "R" indication on the backside of the unit.

-When inserting each wire into a connector, press firmly inwards on the connector's plastic knob (red or black part) and push only the exposed metal end of the wire all the way into the hole. Do not insert the plastic insulation of the wire into the holes.

-Important: Each speaker cable has 2 different wires with different colors or markings to indicate the 2 different polarities of each speaker. Please make sure to follow the same wire to connector combination for both left and right speakers. (Eg. If you insert the black wire of left speaker into the red left connector , then you should also follow same combination for right speaker.

-Place the speaker boxes as far apart as possible for best sound effect.

Power Supply

-This unit works on normal household AC power.

-Make sure the set voltage of the unit matches your local voltage.

-Insert the plug of the AC cord into a wall outlet with AC power.

-Press the On/Off key to power on the unit.

Important: How To Tell If Power Is “On”?

When the power is “On” the entire digital display will be lit up with a blue back light.

04