System Setup Procedure
A. Shelf Use Setup (For Table / Desktop Use)
-The main unit can be placed on a flat surface either with or without the supplied pedestal. See below.
Desktop use without pedestal stand
-Place the main unit on a flat stable surface as shown. There are rubber legs on the bottom of the unit which will help stabilize it and protect the table from scratches.
-Avoid placing the unit on metal surfaces as it may cause interference with frequencies or stations.
-Leave at least 6” of space around the unit for ventilation.
Desktop use with supplied pedestal stand
PANEL
COVER
Step 1: Remove this panel cover from the bottom of the main unit.
Step 2: Install the supplied pedestal stand to the bottom of the main unit as shown. Make sure that the stand is fully and securely fitted and does not come off when the main unit is picked up.
Place the unit on a flat stable surface. Remember to keep adequate ventilation space all the way around the unit to prevent overheating.
20