![](/images/new-backgrounds/1272378/272378169x1.webp)
Operating Basics
Setup Procedure
Please use the following procedure when first using fingerprint authentication.
Fingerprint Registration
You should initially enroll the required authentication data using the Fingerprint Enrollment Wizard.
■In use, the fingerprint authentication system will use the same username and password as defined within the Windows operating system. If no Windows password has been configured, you must do this before starting the fingerprint registration process.
■This sensor has the memory space for at least
1.To run this program, click Start
You are also able to start the Fingerprint Enrollment Wizard by using the following methods.
■
2.The Verify screen will be displayed, enter the Windows logon password and click the Next button.
3.On the User's Fingers screen click the box above the finger you wish to register.
If any of the previously enrolled fingerprints is selected again, the latest information will be enrolled and any previous information
4.The Fingerprint Enrollment screen will be displayed and the tutorial will begin. First click "Replay video" and confirm the proper movement for the finger you wish to register. Then confirm the message displayed on this screen and ensure that there is a check mark in the Run Interactive Tutorial box. Once this has been done, click Next.
5.At the Scanning Practice screen, you are able to practice swiping (three times) your finger to ensure you use the correct method. Click "Try again" to if you wish to practice again. You have finished practicing, click Next button.
6.Register your fingerprint on the Fingerprint Image Capture screen.Let the computer read the finger to be registered 3 times. An image of your fingerprint will be shown on the screen each time the fingerprint is successfully read.
Once the fingerprint is successfully read for the third time, the message Successfully combined will be displayed beneath the fingerprint images and will close the window automatically.
7.When the Store To Sensor screen is displayed, check Store fingerprint to Sensor. Click Finish to complete fingerprint registration.
User’s Manual |