Toshiba F50 user manual Video Playback, Panel, Hardware and Sound and then clicking

		Troubleshooting
i.LINK (IEEE1394) device
	Problem	Procedure
	i.LINK device does not	Check that the cable connecting the external
	function	device to the computer is firmly attached.
		Check to ensure that power is being supplied to
		the device and that the device is turned on.
		Reinstall the drivers required for the device - this
		can be achieved by clicking Start, Control
		Panel, Hardware and Sound and then clicking
		the Add Hardware icon at the left-hand side of
		the screen and following the on-screen
		instructions.
		Restart the computer and the Windows
		operating system to re-initialize the device.
		If you are still unable to resolve the problem,
		contact your reseller, dealer or service provider.
Video Playback

Problem

DVD does not play smoothly when using the Windows Media Center of the DVD playing software

Procedure

Try setting the configuration in the BIOS setup. However, note that when the BIOS setup configuration is modified, the power saving function of PCI Express becomes disabled. Refer to Chapter 7, HW Setup for more information.

Set the PCI Express Link ASPM in the BIOS setup using the following steps:

1.Press the F1 key. The BIOS setup screen will appear.

2.Set the PCI Express Link ASPM to Disabled in BATTERY.

3.Press the END key. A confirmation message will appear.

4.Press the Y key. The BIOS setup will terminate and the computer will reboot.

If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

User’s Manual 10-24