Paradyne 6218-I1 manual Quick Setup with Auto-Connect Disabled, Specifying VPI and VCI

4. Quick Setup

Quick Setup with Auto-Connect Disabled

Procedure

1.Select Quick Setup. The Quick Setup initial screen appears.

2.Verify that DSL Auto-Connect is not selected. Entry boxes for VPI and VCI appear when DSL Auto-Connect is not selected.

3.Specify VPI and VCI as directed by your ISP.

Figure 4-4. Specifying VPI and VCI

4. Click on Next. The Connection Type screen appears.

Figure 4-5. Connection Type

5. Select the protocol and encapsulation type required by your ISP.

6218-A2-GB23-00 September 2005 4-3