2. Hardware Installation and PC Setup
ON/OFF POWER | LAN4 | LAN3 | LAN2 | LAN1 |
|
| LINE | ||||
|
| ||||
|
|
|
|
| |
| RESET |
|
|
| CONSOLE |
| DEFAULT |
|
|
| |
|
|
|
|
|
Figure 2-1. Hardware Installation
Table 2-1. LED Indicators
This LED . . . | Should be: |
|
|
POWER | Solid green to indicate that the device is turned on. If this light is not |
| on, check if the power adapter is attached to the router and plugged |
| into an AC power source. |
|
|
STATUS | Solid green to indicate that the router can communicate with your ISP |
| via ADSL, or flashing when the router is trying to connect to your ISP. |
|
|
ACTIVITY | Flashing when the device is sending or receiving data over the ADSL |
| connection. |
|
|
LAN | Solid green to indicate that the device can communicate with your PC |
| via Ethernet, or flashing when the router is sending or receiving data |
| over Ethernet. |
|
|
If the LEDs are illuminated as expected, the router is working properly.
September 2005 |
