4. Quick Setup
6218-A2-GB23-00 September 2005 4-5
8. Enter the settings specified by your ISP and click on Next. The Device Setup
screen appears.
Figure 4-8. Device Setup
9. If desired, configure configure the DSL Router IP address and Subnet Mask
for the LAN interface to correspond to your LAN's IP Subnet. If you want the
DHCP server to automatically assign IP addresses, then enable the DHCP
server and enter the range of IP addresses that the DHCP server can assign
to your computers. Disable the DHCP server if you would like to manually
assign IP addresses.
If you have a second IP address and subnet mask for the LAN interface, click
on the checkbox to configure it.