Vinotemp WM-25SFCW, WM-15SFCW manual Temperature Control & Humidity Adjustment, Temperature Setting

Page 12

Temperature Control & Humidity Adjustment

1. Temperature Setting

•Set the temperature at 55 °F for the optimum aging of wine

•On initial start-up, the time required to reach the desired temperature will vary, depending on the quantity of bottles, temperature setting and surrounding temperature.

•Allow 24 hours to stabilize the temperature for each new temperature setting operation

2. Use of the Digital Controller

Fig. 3.1 Digital Controller

1) Display

During normal operating conditions, the display shows the value measured by the air regulation probe. In case of active alarm, the temperature flashes alternately to the code alarm.

1.1 LED Functions

1.2 Front Panel Commands

- 11 -

Image 12

Contents WINE-MATESplit System Installation, Operation & Care Manual Table of Contents Important Safety Information Feature Description CFM Cond UnitWM15-25SFCW Evaporator Unit Cellar Construction Installer’s Instruction Condensing UnitEvaporator Unit Air Sensor Refrigeration Piping and ChargingPressure, Superheat and Subcooling Readings Valve Operation Complaint Possible CausesElectrical Wiring VINO1500-2500SSW Wiring Diagram Digital ControllerUse of the adjustable low pressure control if applicable Temperature Control & Humidity Adjustment Temperature SettingPage Manual Defrost Coil Cleaning Care GuideMoisture Removing User’s Troubleshooting Unit running Too long orEvaporator IcingCustomer Support Warranty Limited WarrantyService under Warranty Limitation of Implied Warranty