PROBLEMS WITH YOUR WINE CELLAR
You can solve many common wine cellar problems easily, saving you the cost of a possible service call. Try the suggestion below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com
TROUBLESHOOTING GUIDE
PROBLEM | POSSIBLE CAUSE | |
Wine cellar does not | • Check if unit is not plugged in. | |
operate | • Check if using wrong voltage. | |
| • The circuit breaker tripped. | |
| • | Blown fuse. |
Wine cellar is not | • Check the temperature control setting, external | |
cold enough |
| environment may require a cooler setting. |
| • The door is open too often. | |
| • The door is not closed completely. | |
| • The door seal does not seal properly. | |
| • The wine cellar does not have the correct | |
|
| clearance at the back and two sides. |
Light does not work | • Call the service center. | |
Vibrations | • Check to see that the wine cellar is level. | |
Wine cellar seems to | • The wine cellar is not level. | |
make too much | • Check the fans inside the cabinet and at the back | |
noise |
| of the unit |
Door will not close | • The wine cellar is not level. | |
properly | • The doors were reversed and not properly | |
|
| installed. |
| • The seal is weak. | |
| • The shelves are out of position. | |
Temperature LED | • Main control board does not work. | |
does not display | • | Temperature controller problem. |
| • There is some problem with the plug (no power | |
|
| supply). |
Temperature LED | • Temperature sensor is cut off. | |
display error |
|
|
Buttons are not | • Temperature controller panel is damaged. | |
functional |
|
|
Supply cord is | • Cord must be replaced by the manufacturer or its | |
damaged |
| service agent or a similarly qualified person in |
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1 | 13 |
i n f o @ v i n o t e m p . c o m |
|