Vinotemp VT48TEDS2Z owner manual Installation Instructions, Operating Your Wine Cellar

Page 8

INSTALLATION INSTRUCTIONS

Before Using Your Wine Cellar:

Remove any exterior and interior packing material.

Check to be sure the following parts are included:

For 48-Bottle Wine Cellar, 14 slide out shelves, 7 for each side.

1 instruction manual.

Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

Place your appliance on a floor that is strong enough to support the appliance when it is fully loaded.

To level your appliance, adjust the front legs at the bottom of the appliance.

For freestanding installation only, away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.

Clean the interior surface with lukewarm water using a soft cloth.

OPERATING YOUR WINE CELLAR

It is recommended that you install the wine cellar in a place where the ambient temperature is between 77-80.6°F. If the ambient temperature is above or below recommended temperature, the performance of the unit may be affected. Placing in extreme cold or hot conditions may cause interior temperature to fluctuate. The range of 54-66°F may not be reached. Not intended for garage or basement installs. The temperature may fluctuate depending on whether or not the interior light is on or off or whether the bottles are located on the upper/middle or lower section. Close the cooler door immediately after putting in any items so the inside temperature will not rise dramatically.

8

Image 8
Contents N e C e l l a r Your Wine Cellar Serving WinesTable of Contents Important Safety Instructions General Operating InstructionsElectrical Connection Cabinet Diagram Circuit Diagram Technical Data VT-48TEDS-2ZInstallation Instructions Operating Your Wine CellarCare and Maintenance How to use the buttons on the Display PanelProblems with Your Wine Cellar Troubleshooting GuideTerms of Sale and Warranty Service & Important Notice

VT48TEDS2Z specifications

The Vinotemp VT48TEDS2Z is a compact and sophisticated wine cooler designed for wine enthusiasts who appreciate both functionality and style. Combining modern technology with elegant design, this unit is perfect for preserving and showcasing your wine collection.

One of the standout features of the VT48TEDS2Z is its dual-zone temperature control, which allows users to maintain two distinct temperature settings within the same unit. This is particularly advantageous for collectors who own both red and white wines, as it ensures each type is stored at its optimal temperature. The upper zone can be adjusted between 40°F and 55°F, while the lower zone is perfect for reds, ranging from 55°F to 65°F. The precise temperature settings are easily adjustable via a digital display, making it user-friendly for all wine enthusiasts.

Another notable characteristic of this wine cooler is its generous capacity. With a total storage of 48 bottles, the VT48TEDS2Z provides ample space to accommodate a diverse collection. The shelves are designed to be adjustable, allowing for customization based on the bottle sizes and shapes, including larger champagne bottles. Additionally, the natural wood shelves offer an attractive aesthetic while ensuring the bottles are securely held in place.

The Vinotemp VT48TEDS2Z also boasts a compressor cooling system, which is known for its efficiency and durability. This cooling technology helps maintain a consistent temperature and humidity level, which is critical for long-term wine storage. The unit operates quietly, allowing it to blend seamlessly into any environment without causing disturbances.

For those concerned with UV exposure, the cooler features a solid glass door that is tinted to protect wine from harmful ultraviolet rays. The door also comes equipped with a modern stainless steel frame, adding a touch of elegance that complements any home or bar décor.

In addition to its practical features, the VT48TEDS2Z is thoughtfully designed with an interior LED lighting system, illuminating the wine collection without generating excess heat. This ensures that the wine remains in prime condition while allowing for an attractive display.

Overall, the Vinotemp VT48TEDS2Z is an excellent choice for wine collectors seeking elegance, efficiency, and reliability in a compact unit. Its advanced features and thoughtful design elements make it a valuable addition to any wine lover’s home.