WINE RACK INSTALLATION / REMOVAL
To prevent damaging the door gasket, make sure to have the door all the way open when pulling shelves out of the rail compartment.
To insert a rack in the cabinet (See Figure 1):
1.Using a right angle engagement on both sides, gently push the rack into the cabinet until the notch is positioned over the screw, then put it down over the screws and push the shelf into the cabinet until it stops.
To remove a rack from the cabinet (See Figure 2):
1.Remove all bottles stored on the wood shelf.
2.Grasp the front of the shelf, and gently slide it until the side screws are positioned above the notches in the shelf, then lift the shelf and take it out.
10 | W W W . V I N O T E M P . C O M |