Setting the Temperature Control

FOR EACH ZONE USING MECHANICAL CONTROL KNOB

Mechanical Control Knob

To control the internal temperature, adjust the control dial to achieve your desired temperature.

Temperature can be adjusted from Max Temp (Big Snowflake) to Min Temp (Small Snowflake).

For glass door units, the temperature control is approximately 50-65°F. (For solid door units, the temperature control is approximately 47-65°F.)

To turn off the appliance, turn both temperature controls to minimum setting (small snowflake) and unplug the appliance.

Turning the temperature control to the “minimum” position can stop the cooling cycle of the corresponding chamber, but does not cut off the power to the appliance.

It is recommended that you to install the appliance in a place where the ambient temperature is between 72- 78 degrees Fahrenheit. If the ambient temperature is above or below the recommended temperatures, the performance of the unit may be affected. For example, placing your unit in an extreme cold or hot condition may cause interior temperatures to fluctuate. The desired temperature range may not be reached.

Please allow 24-48 hours minimum for wine/cooler to reach proper temperature after first starting.

22	W W W . V I N O T E M P . C O M