![](/images/new-backgrounds/1262553/262553107x1.webp)
OSD screen functions (continued)
HEAT STATUS
The statuses of the cooling fan, brightness, and internal temperature are displayed.
NOTE: The cooling fan starts running according to the operating temperature or when COOLING FAN is ON in the SCREEN SAVER menu.
When the operating temperature substantially exceeds the operation guaranteed range, the message “TEMPERATURE WARNING!!” is displayed on the screen.
POWER ON DELAY
You can adjust the delayed time until the
The time is selectable from OFF and 2, 4, 6, 8, 10, 20, 30, 40, and 50 seconds.
TERMINAL SETTING
You can select the mode to display the RGB1 (HDMI) or RGB2
DVI-MODE:
Select this setting when displaying the RGB2
Select
HDMI SIGNAL:
Select this setting when displaying the RGB1 (HDMI) signal. Select LIMITED when displaying the signal that uses 16 to 235 levels of 256 levels for each of R, G, and B.
Select FULL when displaying the signal that uses all 256 levels (from level 0 to 255).
DDC/CI
Use to turn ON or OFF the DDC/CI communication function. Select ON for normal use.
CLOSED CAPTION
You can select to display or hide captions.
OFF: | Captions are hidden. |
CC1: | Captions are displayed in sync with the |
| primary audio. |
CC2: | Information (related to the primary |
| audio) is displayed without sync. |
CC3: | Captions are displayed in sync with the |
| secondary audio. |
CC4: | Information (related to the secondary |
| audio) is displayed without sync. |
TT1/TT2/TT3/TT4: Four types of information not related to the displayed images are displayed. (For example, news and weather forecast.)
NOTE: Check with each supplier of your video software and external video devices in advance whether they are compliant with
If their video signals are not compliant with it, images may not be displayed correctly.
ADVANCED OPTION RESET
Selecting ADVANCED OPTION RESET allows you to reset all OSD settings from ADVANCED OPTION settings, except for DDC/CI.
Downloaded From | |
|