Mitsubishi Electronics MDT651S manual Video device Composite video/S video device

P-4Connection procedure (continued)

Connecting a video device (composite video/S video device)/stereo amplifier

This monitor can be connected to a stereo amplifier.

Refer to the user’s manual of the stereo amplifier for details. (Cables shown in the figure below are commercially available.)

•To connect a video device to the VIDEO IN connector (VIDEO IN or S-VIDEO IN) on the monitor, use a BNC cable or an S video cable. For connection to the audio input connector on the monitor, use an audio cable (RCA). Connect the connectors of the audio cable (RCA) correctly. For connection to the VIDEO IN connector, select [VIDEO] using the INPUT button on the monitor or the VIDEO button on the wireless remote control. For connection to the S-VIDEO IN connector, select [VIDEO<S>] using the INPUT button on the monitor or the VIDEO(S) button on the wireless remote control.

•When connecting a stereo amplifier to the monitor, be sure to turn off the power of the stereo amplifier. For connection to the audio output connector on the monitor, use an audio cable (RCA). Connect the connectors of the audio cable (RCA) correctly. Be sure to turn on the monitor first, and then turn on the stereo amplifier.

•The selected audio input signal is output from the AUDIO OUT connector.

Video device

(composite video/S video device)

To video output BNC cable

VIDEO IN

Rear of LCD monitor (first monitor)

To S video output

To Audio output

S video cable

Audio cable (RCA)

Audio cable (RCA)

S-VIDEO IN

AUDIO IN2

To Audio input

AUDIO OUT

Stereo amplifier

VIDEO OUT

External speakers

LCD monitor (second monitor)

(Multi-connection)

BNC cable

VIDEO IN

Downloaded From TV-Manual.com Manuals English-22