WhisperKool 17-1103, XLT owner manual Conclusions

Page 29

Conclusions

After completing the temperature differential test, determine if the unit is not cooling at all or if it is not cooling enough.

If the unit is not cooling at all, contact Vinothèque Customer Service at 800.343.9463. Be sure to have the measurements and results from your Temperature Differential test available.

If the unit is cooling but not cooling fully (with a evaporator differential of 10°F-15°F and a condenser differential of approximately 30°F), it indicates that there is too much heat on the back side of the unit. In this case, you should:

•Check to make sure that there is at least 3’ of unobstructed space in front of the fans/vents to allow adequate ventilation. Improper ventilation causes the majority of problems with cooling units.

•On the condenser side, if the inlet air temperature is >90°F and/or the outlet air temperature is >120°F, there is too much heat on the back side of the unit which is preventing it from cooling fully. To remedy this, heat needs to be dissipated away from the unit through an exhaust fan or other means of ventilation on the exhaust side. You can contact Vinothèque Customer Service to request a ducting flange adapter at no charge to assist in directing heat away from the unit (for warranty units only).

•You might consider installing a Vinothèque approved ventilation ducting system for your unit which can be obtained through Vinothèque Customer Service.

·

•Contact Vinothèque Customer Service at 800.343.9463. Be sure to have the measurements and results from your Temperature Differential test available.

-27-

Page 28 Page 30
Image 29
Page 28 Page 30
Contents WhisperKOOL XLT Page NEW Owners Please NOTE… Table of ContentsHow Does the WhisperKOOL System Work? What Is the WhisperKOOL System?Introduction Receiving and Unpacking ContentsQuick Start Guide Wall & Ceiling Framing Preparing Wine CellarInsulation Vapor BarrierWine Cellar Unobstructed Airflow Ambient Temperature FactorVentilation Cutting the hole for the WhisperKOOL unit Page Electrical Outlet InstallationElectrical Needs Applying Insulation Tape Testing UnitPlacement of Unit Installing ThermostatPower Switch Using the Whisperkool SystemLiquid Measuring Thermostat System PDT JR Operating Instructions IndicatorsButtons OperationPDT PDT Operating InstructionsHumidity Control MaintenanceNormal Operation Airflow Troubleshooting GuideTry this first Door Seal Thermostat Unit MountingCondensation Consumer Care Program Troubleshooting Checklist Failure to install drain line will void warranty Second Temperature Test Temperature Differential TestingFirst Temperature Test Third Temperature Test Temperature Data from TestingTemperature Testing Locations Conclusions Technical Assistance How To Contact Vinothèque Customer ServiceProduct Warranty Information Installation Terms and ConditionsProduct Installation User Costs and Responsibility MaintenanceTrouble Shooting Customer ServiceState Sales Tax General ProvisionsPage Page East Alpine Avenue Stockton, California

17-1103, XLT specifications

The WhisperKool XLT, model 17-1103, is a state-of-the-art wine cooling system engineered to cater to the needs of wine enthusiasts and collectors. Combining cutting-edge technology with user-friendly features, this unit ensures that your wine is stored under optimal conditions for preserving taste and quality.

One of the main features of the WhisperKool XLT 17-1103 is its impressive cooling capacity. It is designed to maintain stable temperatures, crucial for the proper aging of wine. The unit can efficiently cool spaces up to 1,500 cubic feet, making it suitable for both residential wine cellars and commercial applications. With its precise temperature control capabilities, users can set their desired temperature typically between 50°F to 65°F, ensuring that wines are stored just right.

Another defining characteristic of this model is its advanced cooling technology. The WhisperKool XLT incorporates a powerful compressor system that operates quietly, allowing for minimal disturbance in your environment. This is an essential feature for collectors who have dedicated wine rooms or cellars where peace and tranquility are a priority. Additionally, the unit is equipped with a digital display for easy monitoring and adjustment of temperature settings.

The WhisperKool XLT also features an innovative airflow design that helps to circulate cool air throughout the storage area. This technology prevents the buildup of hot spots, which can adversely affect wine quality. Moreover, with the inclusion of an internal humidity controller, the system maintains optimal humidity levels, usually between 50% and 70%. This humidity balance is critical in preventing corks from drying out while also minimizing the risk of mold.

Another notable technology integrated into the WhisperKool XLT is its automatic defrost feature. This function helps maintain the efficiency of the cooling system while reducing maintenance needs. The unit also comes with a simple installation process, requiring minimal modifications to your space, making it a convenient choice for wine lovers.

Overall, the WhisperKool XLT 17-1103 is a top-tier wine cooling solution that boasts a combination of high performance, advanced technology, and user-focused features. With its reliable temperature control, quiet operation, and efficient design, this model is an excellent investment for anyone serious about wine preservation.
Top Page Image Contents