WhisperKool 17-1103, XLT owner manual PDT JR Operating Instructions, Indicators, Buttons, Operation

Page 17

PDT JR OPERATING INSTRUCTIONS

Operating Instructions for Vinothèque PDT JR. Thermostat

Indicators

There are three colored lights on the left side of the thermostat:

•PWR (Green) – When this light is on, the unit is powered.

•RUN (Yellow) – When this light is on, the compressor is running. If the light is flashing, the unit is currently in the five- minute lockout.

•SET (Red) – This light flashes when the set-point

temperature is changed by pressing one of the three control buttons (see below). It flashes once for each press of the (￿) or (￿) button, and twice when the 55 button is pressed.

When the unit is first turned on, all three lights flash slowly while the thermostat starts up. Once the unit completes its start-up check, the compressor is locked out for five minutes. During this time the RUN light will be flashing slowly (1 flash per second).

All three lights will flash rapidly if there is no probe connected to the thermostat.

Buttons

To change the set-point temperature, press either the (￿), (￿) , or (55) buttons. The SET light will flash once for each 1°F the set-point is changed. This set-point will remain in memory until you change it.

If you forget where the unit is set, pressing the (55) button will reset the set-point to 55°F and the SET light will flash twice. The temperature cannot be adjusted below 50°F or above 76°F. Attempting to set the unit outside this range will cause the SET light to rapidly flash.

Operation

Whenever the compressor shuts off normally, a five-minute lockout period begins and the RUN light will be flashing slowly (1 flash per second).

If the compressor runs for 90 continuous minutes, a five- minute defrost cycle is forced, during which time the compressor will not run. During this defrost cycle the RUN light will be flashing rapidly (2.5 flashes per second).

-15-

Page 16 Page 18
Image 17
Page 16 Page 18
Contents WhisperKOOL XLT Page NEW Owners Please NOTE… Table of ContentsHow Does the WhisperKOOL System Work? What Is the WhisperKOOL System?Introduction Receiving and Unpacking ContentsQuick Start Guide Wall & Ceiling Framing Preparing Wine CellarInsulation Vapor BarrierWine Cellar Unobstructed Airflow Ambient Temperature FactorVentilation Cutting the hole for the WhisperKOOL unit Page Electrical Outlet InstallationElectrical Needs Applying Insulation Tape Testing UnitPlacement of Unit Installing ThermostatPower Switch Using the Whisperkool SystemLiquid Measuring Thermostat System PDT JR Operating Instructions IndicatorsButtons OperationPDT PDT Operating InstructionsHumidity Control MaintenanceNormal Operation Airflow Troubleshooting GuideTry this first Door Seal Thermostat Unit MountingCondensation Consumer Care Program Troubleshooting Checklist Failure to install drain line will void warranty Second Temperature Test Temperature Differential TestingFirst Temperature Test Third Temperature Test Temperature Data from TestingTemperature Testing Locations Conclusions Technical Assistance How To Contact Vinothèque Customer ServiceProduct Warranty Information Installation Terms and ConditionsProduct Installation User Costs and Responsibility MaintenanceTrouble Shooting Customer ServiceState Sales Tax General ProvisionsPage Page East Alpine Avenue Stockton, California

17-1103, XLT specifications

The WhisperKool XLT, model 17-1103, is a state-of-the-art wine cooling system engineered to cater to the needs of wine enthusiasts and collectors. Combining cutting-edge technology with user-friendly features, this unit ensures that your wine is stored under optimal conditions for preserving taste and quality.

One of the main features of the WhisperKool XLT 17-1103 is its impressive cooling capacity. It is designed to maintain stable temperatures, crucial for the proper aging of wine. The unit can efficiently cool spaces up to 1,500 cubic feet, making it suitable for both residential wine cellars and commercial applications. With its precise temperature control capabilities, users can set their desired temperature typically between 50°F to 65°F, ensuring that wines are stored just right.

Another defining characteristic of this model is its advanced cooling technology. The WhisperKool XLT incorporates a powerful compressor system that operates quietly, allowing for minimal disturbance in your environment. This is an essential feature for collectors who have dedicated wine rooms or cellars where peace and tranquility are a priority. Additionally, the unit is equipped with a digital display for easy monitoring and adjustment of temperature settings.

The WhisperKool XLT also features an innovative airflow design that helps to circulate cool air throughout the storage area. This technology prevents the buildup of hot spots, which can adversely affect wine quality. Moreover, with the inclusion of an internal humidity controller, the system maintains optimal humidity levels, usually between 50% and 70%. This humidity balance is critical in preventing corks from drying out while also minimizing the risk of mold.

Another notable technology integrated into the WhisperKool XLT is its automatic defrost feature. This function helps maintain the efficiency of the cooling system while reducing maintenance needs. The unit also comes with a simple installation process, requiring minimal modifications to your space, making it a convenient choice for wine lovers.

Overall, the WhisperKool XLT 17-1103 is a top-tier wine cooling solution that boasts a combination of high performance, advanced technology, and user-focused features. With its reliable temperature control, quiet operation, and efficient design, this model is an excellent investment for anyone serious about wine preservation.
Top Page Image Contents