Xerox HUL 61, DSG60S Levelling, Conversion for USE on Butane, G30 or Propane G31, Stability Chain

Page 6

Installation

 

LEVELLING

GB

Four skid feet are fitted which can be adjusted up or

 

 

down to level the cooker.

 

 

CONVERSION FOR USE ON BUTANE

 

(G30) OR PROPANE (G31)

 

Each burner requires the injector to be replaced and

 

bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Remove the enamelled baffle at the front of the grill (2 screws).

5.Remove the screw on the right hand side of the burner and gently slide the burner off the injector.

6.Using a 7mm socket, replace the grill injector as appropriate (see table on previous page).

7.Re-assemble the burner and baffle.

8.Inside the top oven, remove the central screw securing the burner retainer. Slide the retainer to the right slightly and lift away.

9.Lift the burner assembly and place on the floor of

the oven to the right of the burner opening. 10.Using a 7mm socket, replace the oven injector as

appropriate (see table on previous page). 11.Re-assemble the oven burner and retainer. 12.Replace the main oven injector following the same

procedure as for the top oven.

13.Carefully pull off the control knobs and timer buttons.

14.Remove the 2 screws securing the underside of the control panel. Slide the control panel to the left slightly to remove.

15.Remove the 6 screws securing the timer mounting panel. Without completely removing it, manoeuvre the timer mounting panel to gain access to the thermostat bypass screws.

16.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise. The main oven thermostat bypass screw is located on the body of the thermostat below the spindle, the top oven thermostat bypass screw is located on the body of the thermostat to the right of the spindle and the hotplate tap bypass screws are located down the centre of the spindle.

17.Re-assemble the control panel parts ensuring that when the connections are made to the ignition switch, the wires are above the switch rather than below.

18.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

STABILITY CHAIN

A hole in the gas inlet valve bracket can be used to engage a stability chain.

CONNECTING TO GAS SUPPLY

670

300

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

Those cookers converted to use on LPG should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50 mbar.

An adaptor backplate should be fitted within the shaded area shown, to allow the cooker to be pushed fully to the wall and to ensure that the flexible hose is only likely to come into contact with areas at the rear of the cooker that do not exceed a temperature rise of 70°C.

6

Image 6
Contents Contents Operating InstructionsIntroduction Never For your SafetyAlways AlwaysModel Numbers HAG InstallationGAS Safety Installation & USE Regulations Adapting to different types of gas main and top ovenProvision for Ventilation Technical DataLocation Space for FixingConversion for USE on Butane Connecting to GAS SupplyLevelling G30 or Propane G31Electrical Connection If the Fitted Plug is RemovedIf a Moulded Plug is Fitted Installation and Operational Checks Features Electronic Ignition for the Gas Hob Control PanelControl Knobs for the gas burners Main Oven ControlSetting the clock Setting the minute minderProgramming cooking Models with Hob Gas Burner Safety Devices to Prevent Leaks Safety Requirements for Deep FAT FryingHOW to Deal with a FAT Fire HotplateGrill To USE the GrillRelighting the Burner Main Oven Main Oven Cooking Chart Food Approx. Cooking Time and Comments Mark Slow Cook Setting Using the Slow Cook Setting for Slow CookingTo USE the TOP Oven Guidance on Using the TOP OvenTop Oven Relighting the BurnerTop Oven Cooking Chart Top Oven Cooking Chart Care and Cleaning Stay Clean PanelSide Opening Doors Something Wrong with your Cooker Disposal of your product Disposal of old electrical appliancesGuarantee does not cover Months Parts and Labour GuaranteeGuarantee is subject to the following conditions Year Parts GuaranteeHotpoint Service Parts & AccessoriesUK 08448 24 24 Republic of Ireland 01 230 Page Xerox Fabriano

62DGW, HAG 60, HUG 61, HUL 61, DSG60S specifications

The Xerox DSG60S, HUL 61, HUG 61, HAG 60, and 62DGW are prominent models in the Xerox product line, illustrating the company's commitment to innovation and efficiency in document management and printing solutions. Each of these models caters to various business needs, combining advanced technology with user-friendly features.

The Xerox DSG60S is designed for high-volume printing and copying tasks. It boasts a robust printing speed, making it ideal for busy work environments. Its key feature is the advanced digital imaging technology that ensures exceptional print quality, sharp text, and vibrant colors. The DSG60S also supports a wide range of media types and sizes, enhancing its versatility for various projects. Additionally, it offers streamlined workflows through automated tasks, reducing the time spent on repetitive printing jobs.

Next in the lineup, the Xerox HUL 61 is well-regarded for its efficiency in handling a large volume of documents. Featuring user-friendly controls and a clear display, the HUL 61 simplifies the printing and copying processes. Its energy-saving technology contributes to lower operating costs, making it an environmentally friendly choice. The HUL 61's robust security features ensure that sensitive documents remain protected, thus catering to businesses that prioritize data security.

The Xerox HUG 61 expands on this with enhanced connectivity options. It supports mobile printing and wireless capabilities, allowing users to print from their smartphones and tablets seamlessly. This model's adaptable design and fast print speeds make it suitable for offices of all sizes, shaping the future of collaborative work environments.

The Xerox HAG 60 is tailored for heavy-duty tasks, featuring a high-performance engine that can manage the demands of busy offices. Its multifunction capabilities allow users to print, copy, scan, and fax all from a single device. The HAG 60 is equipped with advanced finishing options, making it a versatile choice for businesses requiring professional-quality outputs.

Finally, the Xerox 62DGW combines the best features of its counterparts while introducing cloud-based solutions for document management. It provides easy access to files and printing capabilities from virtually anywhere, enhancing productivity for remote teams. Its intuitive interface ensures that employees can quickly adapt to using the machine, further minimizing downtime.

Together, these models exemplify Xerox's drive for technological advancement, operational efficiency, and user satisfaction, making them invaluable assets for modern businesses aiming to streamline their document workflows and enhance productivity.