U-Line 2175RF, CO2175FF Door Alignment and Adjustment, Door Reversability, Reversing the door

Page 17

9 Self-Closing Doors

Door Alignment and Adjustment

Align and adjust the door if it is not level, or is not sealing properly. If the door is not sealed the unit may not cool properly, or excessive frost may form in the interior.

IMPORTANT

Properly aligned, the door’s gasket should be firmly in contact with the cabinet all the way around the door (no gaps). Carefully examine the door’s gasket to ensure that it is firmly in contact with the cabinet. Also make sure the door gasket is not pinched on the hinge side of the door.

The door will not be flush with the top of the cabinet. The top edge of the door will be 1/8 in. (3.175 mm) below the cabinet top.

1/8"

(3.175 mm)

To align and adjust the door:

1.Compare the top edge of the door (opposite the hinges) to the top edge of the cabinet and note the type (up or down) of adjustment needed.

1

2 3

2.Remove the top hinge pivot pin with a Phillips screwdriver and lift door off bottom hinge pin. Be careful not to lose the door closer insert sets.

3.Turn the door upside down and inspect the hinge plate mounting holes. The plate has slotted mounting holes. Loosen but do not remove the two hinge plate screws(1).

4.If door edge opposite the hinges needs to move up, move plate toward outside of door(2). If door edge needs to move down, move plate toward inside of door(3). Repeat until top edge of door is parallel with top of cabinet and tighten screws (1) securely.

4

5.After adjustment is complete, remove the door closers from the bottom hinge, clean thoroughly and apply petroleum jelly to the mating surfaces of the closers. Be sure that pins on closers align with holes in the door and bottom cabinet hinge plates. Mount door and install top hinge pivot pin.

Door Reversability

Location of the unit may make it desirable to mount the door on the opposite side of the cabinet.

Models with black and white doors are field-reversible.

Stainless steel models must be ordered right- or left-hand hinged.

Reversing the door

The Hinge hardware will be removed and reinstalled on the opposite side of the cabinet.

The top hinge hardware will be reinstalled on the bottom of the opposite side of the cabinet.

The bottom hinge hardware will be reinstalled on the top of the opposite side of the cabinet.

U-Line Self-Closing Door Alignment and Reversal

15

Image 17
Contents USE and Care Guide Please Record Your Model Information Read and save this Use and Care GuideTable of Contents Line Use and Care Guide General Precautions Safety Alert DefinitionsContemporary grille design. Integrates seemlessly into Combo Model FeaturesIce Makers Feature Air Flow Adjusting Air TemperatureInitial Startup Electronic Control PanelInterior Lighting Checking Product TemperatureTo check the actual product temperature in the unit Touch Electronic Control Quick GuideTo turn the unit on or off Control DialAdjusting Air Temperature Other Models DrawersTop Storage Bin CrisperIce Maker Operation Ice Maker AdjustmentLeveling Removing and Installing Interior ShelvesInstalling the grille Removing and Installing GrilleRemoving and Installing Door Shelves Line Use and Care Guide To align and adjust the door Door Alignment and AdjustmentDoor Reversability Reversing the doorReinstall hinge to top opposite Reinstall hinge to bottom oppositeReinstall Hole Plugs Prepare door for reinstallationRemove bottom hinge To reverse the door Remove grilleRemove top hinge, and door Prepare door for reinstallation For black or white doors Install bottom hingeInstall top hinge, and door Install grilleChecking Drawer Alignment Adjusting Drawer AlignmentTop-to-Bottom and Left-to-Right Adjustment Re-installation of DrawerDefrosting Exterior CleaningInterior Cleaning Storage, Vacation and Moving Condensor CleaningProduct Disposal Interval Every Six MonthsIf Service is Required Before Calling for ServiceReplacement Parts Troubleshooting GuideLine Use and Care Guide Line Corporation Limited Warranty LINE.COM
Related manuals
Manual 180 pages 38.87 Kb Manual 24 pages 53.32 Kb Manual 24 pages 15.99 Kb

C2275DWR, 2175RF, CO2175FF specifications

The U-Line CO2175FF and 2175RF are two of the standout offerings in U-Line’s expansive portfolio of beverage centers, designed to provide both functionality and elegance in residential and commercial settings. Known for their commitment to quality and innovation, U-Line has crafted these models to meet the diverse needs of modern consumers.

The CO2175FF features a dual zone temperature management system, allowing users to store wine and beverages at optimal temperatures. With a precise range from 34°F to 60°F, it ensures that your collections will be preserved perfectly, making it ideal for wine enthusiasts and casual drinkers alike. The refrigerator is equipped with a stainless steel exterior, which not only provides a sleek and sophisticated look but also ensures durability. The glass door is UV-resistant, protecting your beverages from harmful light exposure.

On the other hand, the U-Line 2175RF model focuses on a robust refrigeration system designed for maximum storage capacity. This model features adjustable shelving that provides flexibility to accommodate bottles of various sizes, from standard wine bottles to larger formats. With a total capacity of approximately 24 wine bottles, it gives ample space for your collection while maintaining easy access to all your favorites.

Both models boast a quiet operation and are designed to be energy-efficient, making them ideal for those looking to minimize their environmental impact without sacrificing performance. With state-of-the-art technology such as the touch control panel, users can easily adjust settings and monitor temperature conditions, ensuring peace of mind when it comes to beverage storage.

The U-Line CO2175FF and 2175RF also feature built-in LED lighting, which not only enhances visibility but also adds a touch of ambiance to any room. Users can enjoy their favorite drinks in style, thanks to the elegant interior design.

In summary, the U-Line CO2175FF and 2175RF models represent the perfect blend of style and functionality. With features like dual temperature zones, adjustable shelving, and energy-efficient technology, they cater to the needs of modern beverage storage, making them an excellent choice for any home or business. Whether entertaining guests or simply enjoying a quiet evening, these beverage centers offer a sophisticated solution for all your storage needs.