U-Line C2275DWR Air Flow, Initial Startup, Electronic Control Panel, Adjusting Air Temperature

Page 7

4 Product Operation Touch Control

Air Flow

IMPORTANT

The unit requires proper air flow to perform at its highest efficiency. Do not block the front grille or internal fans at any time, or the unit will not perform as expected. Do not install the unit behind a door.

Initial Startup

All U-Line controls are preset at the factory. Initial startup requires no adjustments.

IMPORTANT

U-Line recommends allowing the unit to run overnight before loading refrigerator or freezer with product.

To turn the unit on or off, press and hold the POWER icon (1) for about ten seconds and release. The display will show the unit set- point temperature when turned on and display OFF when the unit is off.

Electronic Control Panel

Digital Display.

The electronic control with digital display shows a single continuous set-point temperature. This set point is for the middle zone, it is a base number used by the controller to maintain the multiple temperature zones in the unit. The factory default set- point for Beverage Center and Refrigerator models is 38°F. The factory default set-point Wine Captain models is 50°F. The set- point temperature is a gauge for further temperature adjustments.

Adjusting Air Temperature

IMPORTANT

Adjust the set point temperature in single increments, and wait 24 hours for the temperature to stabilize before rechecking.

1

2

3

4

5

To adjust the set point temperature:

1.Press and release either the WARMER (2) or COOLER (4) icon to put the controller in the SET TEMPERATURE mode. The display (3) will begin to flash the °F (or °C) symbol.

NOTE: This mode will self-cancel in five seconds, and the display (3) will show the original set-point temperature.

2.Within five seconds (while the °F (or °C) symbol is flashing), press the WARMER or COOLER icon as required to adjust the set point temperature.

3.The change sets five seconds after adjusting the temperature, and the display (3) will show the new set-point temperature.

Temperature °F °C Selection. U-Line products supplied for 110 VAC have temperatures displayed (3) default in Fahrenheit (°F). Models supplied for 220 VAC have temperatures displayed (3) default in Celsius (°C).

Easily adjust the display for either type of temperature display.

Press and hold the LIGHT icon (1) and simultaneously within five seconds press the COOLER icon (5) three times to change the display (3) as needed.

Temperature Display. The digital display shows set-point. air temperature. Under normal operating conditions the temperatures will fluctuate based on a number of factors including door openings, product load, room temperature, and humidity. On passive cooled units the temperature will always be cool toward the top and coolest toward the bottom.

To display actual temperature:

1.Press the WARMER icon (2) for five seconds. The display (3) will indicate the actual temperature.

2.After about 10 seconds, the set point temperature will return to the display.

U-Line Product Operation

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents USE and Care Guide Please Record Your Model Information Read and save this Use and Care GuideTable of Contents Line Use and Care Guide General Precautions Safety Alert DefinitionsIce Makers Feature Combo Model FeaturesContemporary grille design. Integrates seemlessly into Electronic Control Panel Adjusting Air TemperatureAir Flow Initial StartupTo check the actual product temperature in the unit Checking Product TemperatureInterior Lighting Touch Electronic Control Quick GuideTo turn the unit on or off Control DialAdjusting Air Temperature Crisper DrawersOther Models Top Storage BinIce Maker Operation Ice Maker AdjustmentLeveling Removing and Installing Interior ShelvesRemoving and Installing Door Shelves Removing and Installing GrilleInstalling the grille Line Use and Care Guide Reversing the door Door Alignment and AdjustmentTo align and adjust the door Door ReversabilityPrepare door for reinstallation Reinstall hinge to bottom oppositeReinstall hinge to top opposite Reinstall Hole PlugsRemove top hinge, and door To reverse the door Remove grilleRemove bottom hinge Install grille Install bottom hingePrepare door for reinstallation For black or white doors Install top hinge, and doorChecking Drawer Alignment Adjusting Drawer AlignmentTop-to-Bottom and Left-to-Right Adjustment Re-installation of DrawerInterior Cleaning Exterior CleaningDefrosting Interval Every Six Months Condensor CleaningStorage, Vacation and Moving Product DisposalTroubleshooting Guide Before Calling for ServiceIf Service is Required Replacement PartsLine Use and Care Guide Line Corporation Limited Warranty LINE.COM
Related manuals
Manual 180 pages 38.87 Kb Manual 24 pages 53.32 Kb Manual 24 pages 15.99 Kb

C2275DWR, 2175RF, CO2175FF specifications

The U-Line CO2175FF and 2175RF are two of the standout offerings in U-Line’s expansive portfolio of beverage centers, designed to provide both functionality and elegance in residential and commercial settings. Known for their commitment to quality and innovation, U-Line has crafted these models to meet the diverse needs of modern consumers.

The CO2175FF features a dual zone temperature management system, allowing users to store wine and beverages at optimal temperatures. With a precise range from 34°F to 60°F, it ensures that your collections will be preserved perfectly, making it ideal for wine enthusiasts and casual drinkers alike. The refrigerator is equipped with a stainless steel exterior, which not only provides a sleek and sophisticated look but also ensures durability. The glass door is UV-resistant, protecting your beverages from harmful light exposure.

On the other hand, the U-Line 2175RF model focuses on a robust refrigeration system designed for maximum storage capacity. This model features adjustable shelving that provides flexibility to accommodate bottles of various sizes, from standard wine bottles to larger formats. With a total capacity of approximately 24 wine bottles, it gives ample space for your collection while maintaining easy access to all your favorites.

Both models boast a quiet operation and are designed to be energy-efficient, making them ideal for those looking to minimize their environmental impact without sacrificing performance. With state-of-the-art technology such as the touch control panel, users can easily adjust settings and monitor temperature conditions, ensuring peace of mind when it comes to beverage storage.

The U-Line CO2175FF and 2175RF also feature built-in LED lighting, which not only enhances visibility but also adds a touch of ambiance to any room. Users can enjoy their favorite drinks in style, thanks to the elegant interior design.

In summary, the U-Line CO2175FF and 2175RF models represent the perfect blend of style and functionality. With features like dual temperature zones, adjustable shelving, and energy-efficient technology, they cater to the needs of modern beverage storage, making them an excellent choice for any home or business. Whether entertaining guests or simply enjoying a quiet evening, these beverage centers offer a sophisticated solution for all your storage needs.
Top Page Image Contents