U-Line CO2075FF manual Water Supply Connection, Prepare Plumbing, Go on to 7 Prepare Power Supply

Page 13

CO2075FF — Ice Maker/Refrigerator

 

6 Prepare Plumbing

CAUTION

Plumbing installation must observe all state and local codes. All water connections MUST BE made by a licensed/ qualified plumbing contractor. Failure to follow recommendations and instructions may result in damage and/or harm.

2.Locate the compression fitting and ferrule packed with the unit. Slide the compression fitting and ferrule over the 1/4-inch OD water supply line. Do not use thread sealing compound or tape. Using two wrenches, tighten the compression fitting on the supply line (see Figure 31).

3.Carefully bend the water supply line into position and connect the line to the solenoid valve (see Figure 32). Avoid kinking the water supply line.

WARNING

To prevent accidental electrocution, make certain that the floor surfaces surrounding the unit are dry whenever power is removed from, or applied to, the unit.

Water Supply Connection

When connecting the water supply, follow these guidelines:

Review the local plumbing codes before you install the unit.

Connect to the cold water supply.

The water pressure should be between 20 and 120 psi.

Install a shut-off valve in the 1/4 inch OD water supply line.

Connect sufficient tubing to the unit so that tubing may be looped, allowing the unit to be removed for cleaning and servicing (see Figure 32). However, make certain that the tubing is not pinched or damaged during installation.

U-Line recommends the use of copper tubing for installation.

To connect to water supply:

1.Install the 1/4 inch OD copper water line from the main water source (see Figure 30).

Figure 32

IMPORTANT

Normal operation creates some vibration. A water supply line contacting cabinet wall may cause excessive noise during operation or damage to the line.

4.For recessed installations, allow extra water supply line length to provide slack for easy removal from the recessed area (see Figure 32). This will also safeguard against kinking the line.

5.Go on to 7 Prepare Power Supply.

Water

Connection

Figure 30

Figure 31

02/2005

13

www.U-LineService.com

Image 13
Contents CO2075FF Ice Maker/Refrigerator Follow Safety Precautions ContentsInspect and Plan General PrecautionsTools/Materials Required InspectionCut-Out Dimensions Exterior CleaningPrepare Site Black and White ModelsDoor Swing/Clearances Information Reversing the Door Product DimensionsOther Site Requirements Power SupplyWater Supply Environmental RequirementsPrepare and Install Door Panel Side-By-Side Installation InstructionsDoor Panel Installation Custom 1/4 Door Panel InsertFull Overlay Door Panel Removing Existing Door Installation InstructionsAttaching the Full Overlay Panel Assembling the Door Installing the DoorAdjust Door Adjusting Door AlignmentChecking Door Alignment To 6 Prepare PlumbingWater Supply Connection Go on to 7 Prepare Power SupplyPrepare Plumbing Installation Tip Electrical SpecificationsPrepare Power Supply Level the Unit Install the UnitInstallation Troubleshooting Installation of the CO2075FFInstall the Unit Relocating the ShelvesAbout Settings Start-Up TroubleshootingInitial Start-Up Start-Up for the First TimeWho to Call Service Information

CO2075FF specifications

The U-Line CO2075FF is an elegantly designed, all-refrigerator unit that caters to those who appreciate both aesthetics and functional efficiency in their kitchen appliances. This compact model boasts a sleek finish that seamlessly blends with any modern kitchen decor, making it not only a practical addition but also a stylish one.

One of the main features of the U-Line CO2075FF is its remarkable storage capacity relative to its size. With a spacious interior that can accommodate up to 75 cans, the refrigerator is engineered to maximize utility in confined spaces. This makes it an ideal choice for apartments, smaller homes, or even as a supplementary refrigerator in larger kitchens.

The U-Line CO2075FF is equipped with innovative technologies that enhance its functionality. The unit features a state-of-the-art convection cooling system that ensures rapid temperature recovery and consistent temperature distribution throughout the refrigerator. This technology is essential for preserving the freshness of food and beverages, particularly in environments where the refrigerator door is frequently opened.

In terms of temperature control, the U-Line CO2075FF offers a user-friendly digital interface that allows for precise adjustments. Users can easily set the temperature to their desired level, ensuring that their items are stored under optimal conditions. The refrigerator also includes a powerful compressor that operates quietly, minimizing disruption in the home environment.

Another characteristic that sets the U-Line CO2075FF apart is its LED interior lighting. The energy-efficient lights not only illuminate the contents for easy visibility but also contribute to the overall energy efficiency of the unit. Moreover, this refrigerator comes with adjustable shelving, allowing users to customize the interior layout to accommodate items of various sizes, from tall bottles to small jars.

For those who prioritize energy savings, the U-Line CO2075FF is Energy Star certified, meaning it operates with reduced energy consumption without sacrificing performance. This commitment to sustainability makes it an attractive option for eco-conscious consumers.

In summary, the U-Line CO2075FF is a well-rounded refrigerator that combines style, efficiency, and advanced technologies. Its thoughtful design, superior cooling capabilities, and user-friendly features make it a standout choice for anyone looking to enhance their kitchen with a reliable and aesthetically pleasing refrigeration solution.