U-Line CO2075FF manual Full Overlay Door Panel

Page 8

CO2075FF — Ice Maker/Refrigerator

™

 

 

 

Figure 12

Figure 13

Full Overlay Door Panel

Door Panel Preparation

A full overlay door panel completely covers the doorframe and handle to give a built-in appearance. See your U-Line dealer for the optional Full Overlay Door Panel Kit (P/N U-OL2075B — Black or P/N U-OL2075W — White). Appropriate hardware, Modified Handle, Replacement Hinges and a copy of these instructions will be included in the kit.

1.Cut the overlay to the following dimensions (see Figure 15).

Full Overlay Dimensions:

3.Pull door gasket out of groove (top edge of door only). Start in the middle and pull outward, moving toward the edge (see Figure 13). This may take some force. Do not remove the three screws behind gasket.

4.Remove two outside screws holding door handle. Slightly separate door handle from door (see Figure 14).

5.Pull handle up and off.

6.Remove and discard existing panel and cardboard spacer.

7.Slide custom door panel insert into 1/4-inch channel in door front.

8.Holding door gasket out

of the way, replace handle

Figure 14

on door, making sure it is

 

seated properly on insert

 

and that screw holes

 

line up.

 

9.Install two small screws removed in Step 4.

10.Starting at the corners and working inward, push door gasket into place on door.

11.Place door on bottom hinge pin and install upper hinge screw.

12.Reinstall the door shelves by lining up the bosses and first pushing straight in, then down at a 45° angle (see Figure 37 on Page 15). Go on to 5 Adjust Door.

Width: 23-3/4"

Height: 29-7/8"

The door panel must not weigh more than 20 lbs.

3/4"

 

13/16"

 

1/8"

 

1/8"

 

Relief Notch

 

for Pivot Plate

 

Rear View

29-7/8"

of

Wood Panel

 

23-3/4"

 

Figure 15

 

IMPORTANT

Rear View of wood panel for right-hand hinge shown. Use mirror image for left-hand hinges.

2.Create a relief (Figure 15) for pivot plate by cutting notch in top corner and coinciding back corner of overlay panel. Refer to Figure 16 for exact specifications.

www.U-LineService.com

8

02/2005

Page 7 Page 9
Image 8
Page 7 Page 9
Contents CO2075FF Ice Maker/Refrigerator Contents Follow Safety PrecautionsGeneral Precautions Inspect and PlanTools/Materials Required InspectionExterior Cleaning Cut-Out DimensionsPrepare Site Black and White ModelsProduct Dimensions Door Swing/Clearances Information Reversing the DoorPower Supply Other Site RequirementsWater Supply Environmental RequirementsSide-By-Side Installation Instructions Prepare and Install Door PanelDoor Panel Installation Custom 1/4 Door Panel InsertFull Overlay Door Panel Installation Instructions Removing Existing DoorAttaching the Full Overlay Panel Installing the Door Assembling the DoorAdjusting Door Alignment Adjust DoorChecking Door Alignment To 6 Prepare PlumbingPrepare Plumbing Go on to 7 Prepare Power SupplyWater Supply Connection Electrical Specifications Installation TipPrepare Power Supply Level the Unit Install the UnitInstallation of the CO2075FF Installation TroubleshootingInstall the Unit Relocating the ShelvesStart-Up Troubleshooting About SettingsInitial Start-Up Start-Up for the First TimeService Information Who to Call

CO2075FF specifications

The U-Line CO2075FF is an elegantly designed, all-refrigerator unit that caters to those who appreciate both aesthetics and functional efficiency in their kitchen appliances. This compact model boasts a sleek finish that seamlessly blends with any modern kitchen decor, making it not only a practical addition but also a stylish one.

One of the main features of the U-Line CO2075FF is its remarkable storage capacity relative to its size. With a spacious interior that can accommodate up to 75 cans, the refrigerator is engineered to maximize utility in confined spaces. This makes it an ideal choice for apartments, smaller homes, or even as a supplementary refrigerator in larger kitchens.

The U-Line CO2075FF is equipped with innovative technologies that enhance its functionality. The unit features a state-of-the-art convection cooling system that ensures rapid temperature recovery and consistent temperature distribution throughout the refrigerator. This technology is essential for preserving the freshness of food and beverages, particularly in environments where the refrigerator door is frequently opened.

In terms of temperature control, the U-Line CO2075FF offers a user-friendly digital interface that allows for precise adjustments. Users can easily set the temperature to their desired level, ensuring that their items are stored under optimal conditions. The refrigerator also includes a powerful compressor that operates quietly, minimizing disruption in the home environment.

Another characteristic that sets the U-Line CO2075FF apart is its LED interior lighting. The energy-efficient lights not only illuminate the contents for easy visibility but also contribute to the overall energy efficiency of the unit. Moreover, this refrigerator comes with adjustable shelving, allowing users to customize the interior layout to accommodate items of various sizes, from tall bottles to small jars.

For those who prioritize energy savings, the U-Line CO2075FF is Energy Star certified, meaning it operates with reduced energy consumption without sacrificing performance. This commitment to sustainability makes it an attractive option for eco-conscious consumers.

In summary, the U-Line CO2075FF is a well-rounded refrigerator that combines style, efficiency, and advanced technologies. Its thoughtful design, superior cooling capabilities, and user-friendly features make it a standout choice for anyone looking to enhance their kitchen with a reliable and aesthetically pleasing refrigeration solution.
Top Page Image Contents