Taylor 341, 340, 342 manual Section Operating Procedures, Assembly

Page 14

Section 6

Operating Procedures

 

 

The Model 341 has been selected to illustrate the pictured step-by-step operating procedures for the models contained in this manual. Each unit has a 20 quart (18.9 liter) mix hopper and the freezing cylinder holds 7 quarts (6.6 liters) of slush product. The Model 342 has two mix hoppers and two freezing cylinders; therefore, duplicate (where it applies) the following steps for the second side of the Model 342.

We begin our instructions at the point where we enter the store in the morning and find the parts disassembled and laid out to air dry from the previous night’s brush cleaning.

These opening procedures will illustrate how to assemble these parts into the freezer, sanitize them, and prime the freezer with slush base in preparation to serve the first portion.

If you are disassembling the machine for the first time, or need information to get to this starting point in our instructions, turn to page 19, “Disassembly” and start there.

Assembly

MAKE SURE CONTROL SWITCH IS IN THE “OFF” POSITION. Failure to do so may cause injury from electrocution or hazardous moving parts .

Note: When lubricating parts, use an approved food

grade lubricant (example: Taylor Lube).

Step 1

Install the beater drive shaft. Slide the o-ring into the first groove on the drive shaft. Lubricate the groove, o-ring, and shaft portion that comes in contact with the bearing on the beater drive shaft. DO NOT lubricate the square end of the drive shaft. Slide the seal over the shaft and groove until it snaps into place. Fill the inside portion of the seal with 1/4” more lubricant and evenly lubricate the flat side of the seal that fits onto the rear shell bearing.

Figure 2

Insert the drive shaft into the freezing cylinder, (square end first) and into the rear shell bearing, until the seal fits securely over the rear shell bearing. Be certain the drive shaft fits into the drive coupling without binding.

Figure 3

Step 2

Before installing the beater assembly, check the scraper blades for any nicks or signs of wear. If any nicks are present or if the blade is worn, replace both blades.

Operating Procedures

10

Models 340, 341, 342

 

 

 

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Slush Freezers Information found on the data label Table of Contents Models 340, 341 Table of Contents Air Cooled Units SectionWater Connections Water Cooled Units Only Electrical ConnectionsCompressor Warranty Disclaimer To the OperatorSection Safety To Operate SafelyOperator Parts Identification Model511 Model Models 340, 341, 342 Beater Door Assembly Accessories KAY-5Section Important To the Operator Section Operating Procedures AssemblyModels 340, 341 Operating Procedures Operating Procedures Models 340, 341 Step Step Optional Rack Assembly SanitizingPriming Closing Procedure Step Optional Flavor Rack AssemblyDraining Product From Freezing Cylinder RinsingCleaning Disassembly Brush CleaningTroubleshooting Bacterial Count Important Operator ChecklistDuring Cleaning and Sanitizing Regular Maintenance ChecksWinter Storage Section Troubleshooting Guide Problem Probable Cause RemedyModels 340, 341 Troubleshooting Guide Problem Probable Cause Remedy Parts Replacement Schedule Part Description Every Annually QTY MonthsSection Parts List Warr Remarks Parts Number QTY Class UpdateModels 340, 341 Parts List Hood Panel A.--SIDE Lower Spring EXTENSION.375X.025X2.25 Water Cooled Models 340/341 Rev /06 Model 341 049359--33 Rev /06 Model 340/341 049359--40 Rev /06 Model 341 049359--58 Rev /06 Model 342 052720--27 Rev /06 Model 342 052720--33 Rev /06 Model 342 052720--40 Rev /06 Model 342 052720--58 Rev /06

341, 342, 340 specifications

The Taylor 340, 341, and 342 series are distinguished models within the acclaimed Taylor guitar lineup, celebrated for their craftsmanship, tonal richness, and versatility. Each model in this series offers unique features that appeal to musicians of various genres, making them a popular choice among performers and hobbyists alike.

The Taylor 340 model, known for its exceptional sound, is characterized by its combination of Sapele back and sides with a solid Sitka spruce top. This pairing results in a balanced tone that suits both fingerstyle players and strummers. The 340 is designed with an elegant body shape, providing comfortable playability while delivering pronounced midrange frequencies, which makes it an excellent choice for those wanting a guitar that can cut through the mix in a band setting.

Moving on to the Taylor 341, this model enhances the features of the 340 with the addition of a tropical mahogany back and sides, lending warmth and depth to its overall sonic profile. The solid Sitka spruce top remains a staple, ensuring that the guitar retains clarity and articulation. The 341's body size strikes a balance between comfort and projection, making it an ideal option for both intimate performances and larger venues. Players often appreciate the 341 for its dynamic range, allowing for expressive playing styles from intricate fingerpicking to robust strumming.

Finally, the Taylor 342 rounds out the series with its unique appointments and tonal characteristics. Like the other models, it features a solid Sitka spruce top, but pairs it with ovangkol back and sides. This combination gives the 342 a brilliant, bright tone with notable sustain and articulation. The design also includes sleek aesthetics, with an eye-catching rosette and binding that enhances its visual appeal. The guitar is equipped with Taylor’s renowned Expression System® electronics, providing exceptional amplified sound for live performances.

Overall, the Taylor 340, 341, and 342 models share a commitment to quality, innovation, and tonal excellence. Each model's design reflects Taylor's philosophy of marrying modern technology with traditional craftsmanship, resulting in instruments that not only sound great but are also a joy to play. Musicians can choose from this series based on their personal tone preferences and performance needs, ensuring that every player finds a perfect fit within the Taylor family.
Top Page Image Contents