Taylor 342 manual Models 340, 341 Operating Procedures

Page 15

Step 3

If the blades are in good condition, install the scraper blade clip over the scraper blade. Place the rear scraper blade over the rear holding pin (knife edge to the outside). Holding the blade on the beater, turn it over and install the front blade the same way.

Figure 6

Insert the torque rotor shaft, plastic bearing end first, making sure that it fits into the hole in the beater drive shaft. Rotate it several times to check for proper positioning. The hole in the torque rotor shaft should be in the 12 o’clock position.

Figure 4

Holding the blade in position, insert the beater assembly into the freezing cylinder and slide it into position over the drive shaft. Turn the beater slightly to be certain that the beater is properly seated. When in position, the beater will not protrude beyond the front of the freezing cylinder.

10362

Figure 5

Step 4

Install the torque rotor shaft. Slide the o-ring into the groove on the front of the shaft and lubricate these parts to prevent leaking. Place the white, plastic guide bearing on the rear of the rotor shaft. DO NOT lubricate the guide bearing.

Figure 7

Step 5

Assemble the freezer door with the “Ice Buster” (door spout clearing device). To assemble the door with the ice buster, install the o-rings on the draw valve and lubricate.

Figure 8

020807

Models 340, 341, 342

11

Operating Procedures

 

 

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Slush Freezers Information found on the data label Table of Contents Models 340, 341 Table of Contents Electrical Connections SectionWater Connections Water Cooled Units Only Air Cooled UnitsTo the Operator Compressor Warranty DisclaimerTo Operate Safely Section SafetyModel Operator Parts Identification511 Model Models 340, 341, 342 Beater Door Assembly KAY-5 AccessoriesSection Important To the Operator Assembly Section Operating ProceduresModels 340, 341 Operating Procedures Operating Procedures Models 340, 341 Step Sanitizing Step Optional Rack AssemblyPriming Step Optional Flavor Rack Assembly Closing ProcedureRinsing Draining Product From Freezing CylinderCleaning Brush Cleaning DisassemblyRegular Maintenance Checks Important Operator ChecklistDuring Cleaning and Sanitizing Troubleshooting Bacterial CountWinter Storage Problem Probable Cause Remedy Section Troubleshooting GuideModels 340, 341 Troubleshooting Guide Problem Probable Cause Remedy Part Description Every Annually QTY Months Parts Replacement ScheduleWarr Remarks Parts Number QTY Class Update Section Parts ListModels 340, 341 Parts List Hood Panel A.--SIDE Lower Spring EXTENSION.375X.025X2.25 Water Cooled Models 340/341 Rev /06 Model 341 049359--33 Rev /06 Model 340/341 049359--40 Rev /06 Model 341 049359--58 Rev /06 Model 342 052720--27 Rev /06 Model 342 052720--33 Rev /06 Model 342 052720--40 Rev /06 Model 342 052720--58 Rev /06

341, 342, 340 specifications

The Taylor 340, 341, and 342 series are distinguished models within the acclaimed Taylor guitar lineup, celebrated for their craftsmanship, tonal richness, and versatility. Each model in this series offers unique features that appeal to musicians of various genres, making them a popular choice among performers and hobbyists alike.

The Taylor 340 model, known for its exceptional sound, is characterized by its combination of Sapele back and sides with a solid Sitka spruce top. This pairing results in a balanced tone that suits both fingerstyle players and strummers. The 340 is designed with an elegant body shape, providing comfortable playability while delivering pronounced midrange frequencies, which makes it an excellent choice for those wanting a guitar that can cut through the mix in a band setting.

Moving on to the Taylor 341, this model enhances the features of the 340 with the addition of a tropical mahogany back and sides, lending warmth and depth to its overall sonic profile. The solid Sitka spruce top remains a staple, ensuring that the guitar retains clarity and articulation. The 341's body size strikes a balance between comfort and projection, making it an ideal option for both intimate performances and larger venues. Players often appreciate the 341 for its dynamic range, allowing for expressive playing styles from intricate fingerpicking to robust strumming.

Finally, the Taylor 342 rounds out the series with its unique appointments and tonal characteristics. Like the other models, it features a solid Sitka spruce top, but pairs it with ovangkol back and sides. This combination gives the 342 a brilliant, bright tone with notable sustain and articulation. The design also includes sleek aesthetics, with an eye-catching rosette and binding that enhances its visual appeal. The guitar is equipped with Taylor’s renowned Expression System® electronics, providing exceptional amplified sound for live performances.

Overall, the Taylor 340, 341, and 342 models share a commitment to quality, innovation, and tonal excellence. Each model's design reflects Taylor's philosophy of marrying modern technology with traditional craftsmanship, resulting in instruments that not only sound great but are also a joy to play. Musicians can choose from this series based on their personal tone preferences and performance needs, ensuring that every player finds a perfect fit within the Taylor family.
Top Page Image Contents