Sound Bar Bracket Installation

The Sound Bar can be attached to a protective case using the Sound Bar bracket for in vehicle installations. Refer to the figure below.

NOTE: Before installing the Sound Bar set the Sound Bar volume to the maximum setting. The Sound Bar volume will be controlled through the Bluetooth® device or the volume control of the iPad.

Protective Case

Mounting Bar

RED Switch

UNLOCK

LOCK

Headrest Mount

Sound Bar Bracket

1.Hold the RED switch on the Protective Case in the UNLOCK position.

2.While holding the RED switch on the Protective Case mounting arm in the UNLOCK position, insert the Sound Bar Bracket on the Mounting Bar.

3.When the Sound Bar Bracket is fully inserted on the mounting arm, release the RED switch on the Protective Case mounting arm moving the switch to the LOCK position.