|
| Gain Settings Inside |
| |
A y r e |
|
|
|
|
Boulder, Colorado USA | Output | 47k | 47k | Output |
| Input | Input | ||
S.N. |
|
| ||
|
|
|
| |
Unbal Bal | 100 1000 | 1000 100 | Bal Unbal | |
Volts
50/60 Hertz
10 W Max
connectors, there are two choices for making the proper connection:
1)Use custom phono cables with XLR connectors at the phono preamplifier end and the appropriate connector (RCA or DIN, depending on the particular installation) at the turntable end. This is the preferred solution and offers the highest level of sound quality, or;
2)Use the existing cables with RCA connectors to connect to the unbalanced inputs of the
Custom phono cables with XLR connectors for balanced operation are available from your local Ayre dealer.
A small toggle switch near the input connectors configures the circuit for either the balanced or unbalanced inputs.
Only one set of inputs (balanced or unbalanced) may be connected at a time.
4