Taylor AB-1000-BL instruction manual Troubleshooting

Page 11

TROUBLESHOOTING

The Blender & Smoothie Dispenser will not operate.

Has a household fuse blown,or has a circuit breaker tripped?

Is the power supply cord properly seated in the unit and the outlet?

Is the inter-locking jar and lid secured properly?

Has the cord been damaged in some way? If so,DO NOT USE THE APPLI- ANCE. Contact Customer Service for replacement information.

Has the safety shut off feature activated due to improper lid closure?

Blender & Smoothie Dispenser is vibrating.

Are the components securely positioned in the base? If not, turn off the unit and reposition the components onto the unit base.

Has the appliance been overloaded? Attempting to blend large quantities or large pieces of food may cause vibration. See section titled “How to use your Blender & Smoothie Dispenser” or BLENDING GUIDE.

The lid will not seat properly.

Is the product assembled properly?

Is there food blocking the lid? If so, the jar is overloaded. Remove half of the ingredients and blend in two smaller batches.

Blended result is too watery.

The food or beverage is over processed. Use brief pulses, use a lower speed or blend for less time.

Food is collecting on the sides of the jar.

Youmay be blending too much ingredients at one time. Turn machine off. When the blade stops completely,remove cover and clean with a spatula, turn- ing ingredients inward toward the blade. Add additional liquid if necessary. If there is still a problem, remove half of the ingredients and blend in two smaller batches.

11

Image 11
Contents Blender SmoothieDispenser Table of Contents Importantsafeguards Introduction Safety SystemSpecial Instructions Descriptive Diagram Using Your Blender & Smoothie Dispenser HOW to USE the Dispensing Feature Blending Guide Ance from outlet. do not Attempt to Clean While Cleaning and MaintainencePage Troubleshooting If you need replacement parts Warranty